16 bpp mode is required by LCD console mode. This change updates exynos board files.
Signed-off-by: Przemyslaw Marczak <p.marc...@samsung.com> --- Changes v2: -- new patch Changes v3: - none Changes v4: - none Changes v5: - none Changes v6: - none board/samsung/trats/trats.c | 2 +- board/samsung/trats2/trats2.c | 2 +- board/samsung/universal_c210/universal.c | 2 +- include/configs/s5pc210_universal.h | 2 +- include/configs/trats.h | 2 +- include/configs/trats2.h | 2 +- 6 files changed, 6 insertions(+), 6 deletions(-) diff --git a/board/samsung/trats/trats.c b/board/samsung/trats/trats.c index a644b60..32a6cee 100644 --- a/board/samsung/trats/trats.c +++ b/board/samsung/trats/trats.c @@ -742,7 +742,7 @@ vidinfo_t panel_info = { .vl_hsp = CONFIG_SYS_LOW, .vl_vsp = CONFIG_SYS_LOW, .vl_dp = CONFIG_SYS_LOW, - .vl_bpix = 5, /* Bits per pixel, 2^5 = 32 */ + .vl_bpix = 4, /* Bits per pixel, 2^4 = 16 */ /* s6e8ax0 Panel infomation */ .vl_hspw = 5, diff --git a/board/samsung/trats2/trats2.c b/board/samsung/trats2/trats2.c index 4834f90..b60a2da 100644 --- a/board/samsung/trats2/trats2.c +++ b/board/samsung/trats2/trats2.c @@ -565,7 +565,7 @@ vidinfo_t panel_info = { .vl_hsp = CONFIG_SYS_LOW, .vl_vsp = CONFIG_SYS_LOW, .vl_dp = CONFIG_SYS_LOW, - .vl_bpix = 5, /* Bits per pixel, 2^5 = 32 */ + .vl_bpix = 4, /* Bits per pixel, 2^4 = 16 */ /* s6e8ax0 Panel infomation */ .vl_hspw = 5, diff --git a/board/samsung/universal_c210/universal.c b/board/samsung/universal_c210/universal.c index 1c8b8b8..e300da3 100644 --- a/board/samsung/universal_c210/universal.c +++ b/board/samsung/universal_c210/universal.c @@ -446,7 +446,7 @@ vidinfo_t panel_info = { .vl_vsp = CONFIG_SYS_HIGH, .vl_dp = CONFIG_SYS_HIGH, - .vl_bpix = 5, /* Bits per pixel */ + .vl_bpix = 4, /* Bits per pixel */ /* LD9040 LCD Panel */ .vl_hspw = 2, diff --git a/include/configs/s5pc210_universal.h b/include/configs/s5pc210_universal.h index 67b08fc..93b9dfb 100644 --- a/include/configs/s5pc210_universal.h +++ b/include/configs/s5pc210_universal.h @@ -280,7 +280,7 @@ int universal_spi_read(void); #define CONFIG_EXYNOS_FB #define CONFIG_LCD #define CONFIG_CMD_BMP -#define CONFIG_BMP_32BPP +#define CONFIG_BMP_16BPP #define CONFIG_LD9040 #define CONFIG_EXYNOS_MIPI_DSIM #define CONFIG_VIDEO_BMP_GZIP diff --git a/include/configs/trats.h b/include/configs/trats.h index b1bdeaa..f5e796a 100644 --- a/include/configs/trats.h +++ b/include/configs/trats.h @@ -311,7 +311,7 @@ #define CONFIG_EXYNOS_FB #define CONFIG_LCD #define CONFIG_CMD_BMP -#define CONFIG_BMP_32BPP +#define CONFIG_BMP_16BPP #define CONFIG_FB_ADDR 0x52504000 #define CONFIG_S6E8AX0 #define CONFIG_EXYNOS_MIPI_DSIM diff --git a/include/configs/trats2.h b/include/configs/trats2.h index 528e9a3..a856b56 100644 --- a/include/configs/trats2.h +++ b/include/configs/trats2.h @@ -321,7 +321,7 @@ int get_soft_i2c_sda_pin(void); #define CONFIG_EXYNOS_FB #define CONFIG_LCD #define CONFIG_CMD_BMP -#define CONFIG_BMP_32BPP +#define CONFIG_BMP_16BPP #define CONFIG_FB_ADDR 0x52504000 #define CONFIG_S6E8AX0 #define CONFIG_EXYNOS_MIPI_DSIM -- 1.7.9.5 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot