Dear Wolfgang Denk,
I forgot some explanations, sorry about that.
I refer to this problem :
http://lists.denx.de/pipermail/u-boot/2013-July/159055.html
First, I tried to boot linux with initramfs through u-boot, but I had
the same problem explained in my first post.
Here is a part of the config file used by my -boot :
/* High Level Configuration Options */
#define CONFIG_ARMV7 /* This is armv7 Cortex-A9 CPU core */
#define CONFIG_MXC
#define CONFIG_MX6DL
#define CONFIG_MX6DL_DDR3
#define CONFIG_MX6DL_SABRESD
#define CONFIG_DDR_32BIT
#define CONFIG_FLASH_HEADER
#define CONFIG_FLASH_HEADER_OFFSET 0x400
#define CONFIG_MX6_CLK32 32768
/* Disable secure boot feature in default, if you want to enable this
* feature, please carefully read related documents, you may needs to
* change u-boot.lds */
#undef CONFIG_SECURE_BOOT
#define CONFIG_SKIP_RELOCATE_UBOOT
#define CONFIG_ARCH_CPU_INIT
#undef CONFIG_ARCH_MMU /* disable MMU first */
#define CONFIG_L2_OFF /* disable L2 cache first*/
#define CONFIG_MX6_HCLK_FREQ 24000000
#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
#define CONFIG_SYS_64BIT_VSPRINTF
#define BOARD_LATE_INIT
#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
#define CONFIG_SERIAL_TAG
#define CONFIG_REVISION_TAG
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_INITRD_TAG
#define CONFIG_MXC_GPIO
initramfs is loaded in ram at 0x10C00000 by mfgtools, which is the
freescales's manufacturing tool.
I don't know which configuration I need to set on u-boot to tell him
initramfs is at address 0x10C00000, and consequently it hands on linux.
I am really bloqued on this problem.
Can you give me some hints ?
Tanks a lot !
Regards,
Le 17/01/2014 07:16, Wolfgang Denk a écrit :
Dear Jean-baptiste DURONEA,
In message <52d7d2f7.2050...@gmail.com> you wrote:
We made a custom board based on imx6solo.
I have the same problem !
The same problem as what or who? I cannot even guess...
I have some trouble booting linux kernel with initramfs. I built linux
kernel with CONFIG_BLK_DEV_INITRD, so Kbuild generates
usr/initramfs_data.cpio which is integrated into the kernel.
...
...
My kernel hangs after the last line, instead of doing "Freeing init
memory: ..." but I don't know if it comes from the same problem or not...
Sorry, but I cannot see anything in your posting which might even
remotely be related to U-Boot. This is the U-Boot mailing list - your
question is off topic here.
Best regards,
Wolfgang Denk
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
