Hi, Jagan,
I tested my driver based on your sf quad changes, and it is ok. For the
sf quad functions, I didn' t test, because my driver doesn't support sf quad
now.
Thanks.
Best Regards,
Alison Wang
> -----Original Message-----
> From: Jagan Teki [mailto:jagannadha.sutradharudu-t...@xilinx.com]
> Sent: Monday, January 13, 2014 2:39 PM
> To: Wang Huan-B18965; jagannadha.sutradharudu-t...@xilinx.com;
> sba...@denx.de
> Cc: u-boot@lists.denx.de
> Subject: Re: [PATCH 0/3] arm: vf610: Add QSPI support for VF610
>
> Hi,
>
> Thanks for the series.
> I will review once the today release done.
>
> And is it possible to test these changes on sf quad changes, if OK will
> send the details.
>
> On Monday 13 January 2014 11:02 AM, Alison Wang wrote:
> > This series contain QSPI support for Freescale Vybrid VF610.
> >
> > The QSPI(Quad Serial Peripheral Interface) acts as an interface to
> one
> > single or two external serial flash devices, each with up to 4
> bidirectional data lines.
> >
> > QSPI has a Look-update-table(LUT) which consists of a number of
> > pre-programmed sequences. Each sequence is basically a sequence of
> > instruction-operand pairs which when executed sequentially generates
> a valid serial flash transaction.
> >
> > This driver has been tested on VF610TWR.
> >
> > ----------------------------------------------------------------
> > Alison Wang (3):
> > arm: imx: Add two macros for VF610 in IOMUX_PAD structure
> > arm: vf610: Add QSPI support for VF610TWR
> > arm: vf610: Add QSPI driver support
> >
> > arch/arm/include/asm/arch-vf610/crm_regs.h | 11 ++-
> > arch/arm/include/asm/arch-vf610/imx-regs.h | 4 +-
> > arch/arm/include/asm/arch-vf610/iomux-vf610.h | 14 +++
> > arch/arm/include/asm/imx-common/iomux-v3.h | 2 +
> > board/freescale/vf610twr/vf610twr.c | 29 ++++++-
> > drivers/spi/Makefile | 1 +
> > drivers/spi/fsl_qspi.c | 482
> +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> ++++++++++++++++++++++++++++++++
> > drivers/spi/fsl_qspi.h | 127
> +++++++++++++++++++++++++++
> > include/configs/vf610twr.h | 11 +++
> > 9 files changed, 677 insertions(+), 4 deletions(-)
> > create mode 100644 drivers/spi/fsl_qspi.c
> > create mode 100644 drivers/spi/fsl_qspi.h
> >
> >
>
> --
> Thanks,
> Jagan.
>
>
> This email and any attachments are intended for the sole use of the
> named recipient(s) and contain(s) confidential information that may be
> proprietary, privileged or copyrighted under applicable law. If you are
> not the intended recipient, do not read, copy, or forward this email
> message or any attachments. Delete this email message and any
> attachments immediately.
>
>
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
