The vexpress_aemv8a is the first aarch64 board in U-Boot.
As it was introduced, it gets built when "MAKEALL -a arm"
is invoked, and fails as this command is run with a 32-bit,
not 64-bit, toolchain as the cross-compiler.
Introduce 'arch64' as a valid 'MAKEALL -a' argument, treated
as 'arm' for all other intents, and change the architecture
of the vexpress_aemv8a entry in boards.cfg from 'arm' to
'aarch64'.
Signed-off-by: Albert ARIBAUD <albert.u.b...@aribaud.net>
---
This patch must be applied above the arm64 series and Tom's (amended)
patch re config.h.
It has been tested and verified to:
- correctly exclude vexpress_aemv8a from MAKEALL -a arm
- correctly include only vexpress_aemv8a from MAKEALL -a aarch64
- correctly build vexpress_aemv8a from MAKEALL -a aarch64
boards.cfg | 3 +--
mkconfig | 7 +++++++
2 files changed, 8 insertions(+), 2 deletions(-)
diff --git a/boards.cfg b/boards.cfg
index e168590..029553d 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -397,7 +397,7 @@ Active arm pxa - -
vpac270
Active arm pxa - icpdas lp8x4x
lp8x4x -
Sergey Yanovich <ynv...@gmail.com>
Active arm pxa - toradex -
colibri_pxa270 -
Marek Vasut <marek.va...@gmail.com>
Active arm sa1100 - - -
jornada -
Kristoffer Ericson <kristoffer.eric...@gmail.com>
-Active arm armv8 - armltd vexpress64
vexpress_aemv8a vexpress_aemv8a:ARM64
David Feng <feng...@phytium.com.cn>
+Active aarch64 armv8 - armltd vexpress64
vexpress_aemv8a vexpress_aemv8a:ARM64
David Feng <feng...@phytium.com.cn>
Active avr32 at32ap at32ap700x atmel -
atngw100 -
Haavard Skinnemoen <haavard.skinnem...@atmel.com>
Active avr32 at32ap at32ap700x atmel -
atngw100mkii -
Andreas Bießmann <andreas.de...@googlemail.com>
Active avr32 at32ap at32ap700x atmel atstk1000
atstk1002 -
Haavard Skinnemoen <haavard.skinnem...@atmel.com>
@@ -1242,4 +1242,3 @@ Orphan powerpc mpc8xx - -
genietv
Orphan powerpc mpc8xx - - mbx8xx
MBX -
-
Orphan powerpc mpc8xx - - mbx8xx
MBX860T -
-
Orphan powerpc mpc8xx - - nx823
NX823 -
-
-
diff --git a/mkconfig b/mkconfig
index 40db991..b96c81f 100755
--- a/mkconfig
+++ b/mkconfig
@@ -85,6 +85,13 @@ if [ "${ARCH}" -a "${ARCH}" != "${arch}" ]; then
exit 1
fi
+#
+# Test above needed aarch64, now we need arm
+#
+if [ "${arch}" = "aarch64" ]; then
+ arch="arm"
+fi
+
if [ "$options" ] ; then
echo "Configuring for ${BOARD_NAME} - Board: ${CONFIG_NAME}, Options:
${options}"
else
--
1.8.3.2
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
