Hi Mateusz.
On 01/09/2014 11:31 PM, Mateusz Zalega wrote:
> Proper adjustment for supporting DFU at GONI target has been made.
> The s5p_goni.h file has been updated. Moreover, the code for low level
> USB initialization has been added to Goni board code.
>
> The malloc pool has been enlarged in order to support larger buffer
> sizes needed by DFU implementation.
>
> Change-Id: I7812f395a3ee3660cec31f4d8c954057c0149863
> Signed-off-by: Arkadiusz Wlodarczyk <a.wlodarc...@samsung.com>
> Signed-off-by: Kyungmin Park <kyungmin.p...@samsung.com>
> Signed-off-by: Mateusz Zalega <m.zal...@samsung.com>
> Tested-by: Arkadiusz Wlodarczyk <a.wlodarc...@samsung.com>
> Tested-by: Mateusz Zalega <m.zal...@samsung.com>
> Cc: Minkyu Kang <mk7.k...@samsung.com>
> ---
> board/samsung/goni/goni.c | 10 +++++++++
> include/configs/s5p_goni.h | 54
> ++++++++++++++++++++++++++++++++++++----------
> 2 files changed, 53 insertions(+), 11 deletions(-)
>
> diff --git a/board/samsung/goni/goni.c b/board/samsung/goni/goni.c
> index 366f648..5498daa 100644
> --- a/board/samsung/goni/goni.c
> +++ b/board/samsung/goni/goni.c
> @@ -13,6 +13,9 @@
> #include <usb/s3c_udc.h>
> #include <asm/arch/cpu.h>
> #include <power/max8998_pmic.h>
> +#include <usb.h>
> +#include <usb_mass_storage.h>
> +
> DECLARE_GLOBAL_DATA_PTR;
>
> static struct s5pc110_gpio *s5pc110_gpio;
> @@ -172,4 +175,11 @@ struct s3c_plat_otg_data s5pc110_otg_data = {
> .regs_otg = S5PC110_OTG_BASE,
> .usb_phy_ctrl = S5PC110_USB_PHY_CONTROL,
> };
> +
> +int board_usb_init(int index, enum usb_init_type init)
> +{
> + debug("USB_udc_probe\n");
> + s3c_udc_probe(&s5pc110_otg_data);
> + return 0;
Always return 0? return s3c_udc_probe(&s5pc110_otg_data);
> +}
> #endif
> diff --git a/include/configs/s5p_goni.h b/include/configs/s5p_goni.h
> index 1d2dcc0..24a0fcc 100644
> --- a/include/configs/s5p_goni.h
> +++ b/include/configs/s5p_goni.h
> @@ -39,7 +39,7 @@
> #define CONFIG_CMDLINE_EDITING
>
> /* Size of malloc() pool.*/
> -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + SZ_1M)
> +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 80 * SZ_1M)
>
> /*
> * select serial console configuration
> @@ -70,14 +70,18 @@
> #define CONFIG_CMD_CACHE
> #define CONFIG_CMD_REGINFO
> #define CONFIG_CMD_ONENAND
> -#define CONFIG_CMD_MTDPARTS
> #define CONFIG_CMD_MMC
> +#define CONFIG_CMD_DFU
>
> -#define CONFIG_BOOTDELAY 1
> -#define CONFIG_ZERO_BOOTDELAY_CHECK
> +/* USB Composite download gadget - g_dnl */
> +#define CONFIG_USBDOWNLOAD_GADGET
> +#define CONFIG_DFU_FUNCTION
> +#define CONFIG_DFU_MMC
>
> -#define CONFIG_MTD_DEVICE
> -#define CONFIG_MTD_PARTITIONS
> +/* USB Samsung's IDs */
> +#define CONFIG_G_DNL_VENDOR_NUM 0x04E8
> +#define CONFIG_G_DNL_PRODUCT_NUM 0x6601
> +#define CONFIG_G_DNL_MANUFACTURER "Samsung"
>
> /* Actual modem binary size is 16MiB. Add 2MiB for bad block handling */
> #define MTDIDS_DEFAULT "onenand0=samsung-onenand"
> @@ -90,7 +94,34 @@
> ",12m(modem)"\
> ",60m(qboot)\0"
>
> -#define NORMAL_MTDPARTS_DEFAULT MTDPARTS_DEFAULT
> +#define CONFIG_BOOTDELAY 1
> +#define CONFIG_ZERO_BOOTDELAY_CHECK
> +
> +/* partitions definitions */
> +#define PARTS_CSA "csa-mmc"
> +#define PARTS_BOOTLOADER "u-boot"
> +#define PARTS_BOOT "boot"
> +#define PARTS_ROOT "platform"
> +#define PARTS_DATA "data"
> +#define PARTS_CSC "csc"
> +#define PARTS_UMS "ums"
> +
> +#define CONFIG_DFU_ALT \
> + "u-boot raw 0x80 0x400;" \
> + "uImage ext4 0 2;" \
> + "exynos3-goni.dtb ext4 0 2;" \
exynos3-goni.dtb?
Best Regards,
Jaehoon Chung
> + ""PARTS_ROOT" part 0 5\0"
> +
> +#define PARTS_DEFAULT \
> + "uuid_disk=${uuid_gpt_disk};" \
> + "name="PARTS_CSA",size=8MiB,uuid=${uuid_gpt_"PARTS_CSA"};" \
> + "name="PARTS_BOOTLOADER",size=60MiB," \
> + "uuid=${uuid_gpt_"PARTS_BOOTLOADER"};" \
> + "name="PARTS_BOOT",size=100MiB,uuid=${uuid_gpt_"PARTS_BOOT"};" \
> + "name="PARTS_ROOT",size=1GiB,uuid=${uuid_gpt_"PARTS_ROOT"};" \
> + "name="PARTS_DATA",size=3GiB,uuid=${uuid_gpt_"PARTS_DATA"};" \
> + "name="PARTS_CSC",size=150MiB,uuid=${uuid_gpt_"PARTS_CSC"};" \
> + "name="PARTS_UMS",size=-,uuid=${uuid_gpt_"PARTS_UMS"}\0" \
>
> #define CONFIG_BOOTCOMMAND "run mmcboot"
>
> @@ -144,18 +175,18 @@
> "verify=n\0" \
> "rootfstype=ext4\0" \
> "console=" CONFIG_DEFAULT_CONSOLE \
> - "mtdparts=" MTDPARTS_DEFAULT \
> "meminfo=mem=80M mem=256M@0x40000000 mem=128M@0x50000000\0" \
> - "loaduimage=fatload mmc ${mmcdev}:${mmcbootpart} 0x30007FC0 uImage\0" \
> + "loaduimage=ext4load mmc ${mmcdev}:${mmcbootpart} 0x30007FC0 uImage\0" \
> "mmcdev=0\0" \
> "mmcbootpart=2\0" \
> "mmcrootpart=5\0" \
> + "partitions=" PARTS_DEFAULT \
> "bootblock=9\0" \
> "ubiblock=8\0" \
> "ubi=enabled\0" \
> - "opts=always_resume=1"
> + "opts=always_resume=1\0" \
> + "dfu_alt_info=" CONFIG_DFU_ALT "\0"
>
> -/* Miscellaneous configurable options */
> #define CONFIG_SYS_LONGHELP /* undef to save memory */
> #define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser
> */
> #define CONFIG_SYS_PROMPT "Goni # "
> @@ -194,6 +225,7 @@
>
> #define CONFIG_CMD_FAT
> #define CONFIG_CMD_EXT4
> +#define CONFIG_CMD_EXT4_WRITE
>
> /* write support for filesystems */
> #define CONFIG_FAT_WRITE
>
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
