On Fri, Jan 3, 2014 at 4:10 PM, Vivek Gautam <gautam.vi...@samsung.com> wrote: > Previously as a part of moving the VBUS gpio support to device tree > following patch removed this and added relevant support in driver: > 4a271cb exynos: usb: Switch USB VBUS GPIOs to be device tree configured > > Recent changes for common board file migration for exynos platform > added it again. So removing it now. > > Signed-off-by: Vivek Gautam <gautam.vi...@samsung.com> > Cc: Julius Werner <jwer...@chromium.org> > Cc: Minkyu Kang <mk7.k...@samsung.com> > Cc: Marek Vasut <ma...@denx.de> > ---
Based on u-boot-samsung 'master' branch. > board/samsung/smdk5250/smdk5250.c | 19 ------------------- > 1 file changed, 19 deletions(-) > > diff --git a/board/samsung/smdk5250/smdk5250.c > b/board/samsung/smdk5250/smdk5250.c > index 943c29a..a69f73d 100644 > --- a/board/samsung/smdk5250/smdk5250.c > +++ b/board/samsung/smdk5250/smdk5250.c > @@ -26,22 +26,6 @@ > > DECLARE_GLOBAL_DATA_PTR; > > -#ifdef CONFIG_USB_EHCI_EXYNOS > -static int board_usb_vbus_init(void) > -{ > - struct exynos5_gpio_part1 *gpio1 = (struct exynos5_gpio_part1 *) > - samsung_get_base_gpio_part1(); > - > - /* Enable VBUS power switch */ > - s5p_gpio_direction_output(&gpio1->x2, 6, 1); > - > - /* VBUS turn ON time */ > - mdelay(3); > - > - return 0; > -} > -#endif > - > #ifdef CONFIG_SOUND_MAX98095 > static void board_enable_audio_codec(void) > { > @@ -56,9 +40,6 @@ static void board_enable_audio_codec(void) > > int exynos_init(void) > { > -#ifdef CONFIG_USB_EHCI_EXYNOS > - board_usb_vbus_init(); > -#endif > #ifdef CONFIG_SOUND_MAX98095 > board_enable_audio_codec(); > #endif > -- > 1.7.10.4 > > _______________________________________________ > U-Boot mailing list > U-Boot@lists.denx.de > http://lists.denx.de/mailman/listinfo/u-boot -- Best Regards Vivek Gautam Samsung R&D Institute, Bangalore India _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot