Hi, Chin.
On 12/19/2013 02:16 AM, Chin Liang See wrote:
> To add the DesignWare MMC driver support for Altera SOCFPGA. It
> required information such as clocks and bus width from platform
> specific files (SOCFPGA handoff files)
>
> Signed-off-by: Chin Liang See <cl...@altera.com>
> Cc: Rajeshwari Shinde <rajeshwar...@samsung.com>
> Cc: Jaehoon Chung <jh80.ch...@samsung.com>
> Cc: Andy Fleming <aflem...@freescale.com>
> Cc: Pantelis Antoniou <pa...@antoniou-consulting.com>
> ---
> Changes for v2
> - Adding u-boot-mmc maintainer
> ---
> arch/arm/include/asm/arch-socfpga/dwmmc.h | 12 +++++
> drivers/mmc/Makefile | 1 +
> drivers/mmc/socfpga_dw_mmc.c | 72
> +++++++++++++++++++++++++++++
> 3 files changed, 85 insertions(+)
> create mode 100755 arch/arm/include/asm/arch-socfpga/dwmmc.h
> create mode 100755 drivers/mmc/socfpga_dw_mmc.c
>
> diff --git a/arch/arm/include/asm/arch-socfpga/dwmmc.h
> b/arch/arm/include/asm/arch-socfpga/dwmmc.h
> new file mode 100755
> index 0000000..945eb64
> --- /dev/null
> +++ b/arch/arm/include/asm/arch-socfpga/dwmmc.h
> @@ -0,0 +1,12 @@
> +/*
> + * (C) Copyright 2013 Altera Corporation <www.altera.com>
> + *
> + * SPDX-License-Identifier: GPL-2.0+
> + */
> +
> +#ifndef _SOCFPGA_DWMMC_H_
> +#define _SOCFPGA_DWMMC_H_
> +
> +extern int socfpga_dwmmc_init(u32 regbase, int bus_width, int index);
> +
> +#endif /* _SOCFPGA_SDMMC_H_ */
> diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile
> index 1ed26ca..e793ed9 100644
> --- a/drivers/mmc/Makefile
> +++ b/drivers/mmc/Makefile
> @@ -28,6 +28,7 @@ obj-$(CONFIG_TEGRA_MMC) += tegra_mmc.o
> obj-$(CONFIG_DWMMC) += dw_mmc.o
> obj-$(CONFIG_EXYNOS_DWMMC) += exynos_dw_mmc.o
> obj-$(CONFIG_ZYNQ_SDHCI) += zynq_sdhci.o
> +obj-$(CONFIG_SOCFPGA_DWMMC) += socfpga_dw_mmc.o
> ifdef CONFIG_SPL_BUILD
> obj-$(CONFIG_SPL_MMC_BOOT) += fsl_esdhc_spl.o
> else
> diff --git a/drivers/mmc/socfpga_dw_mmc.c b/drivers/mmc/socfpga_dw_mmc.c
> new file mode 100755
> index 0000000..554f51b
> --- /dev/null
> +++ b/drivers/mmc/socfpga_dw_mmc.c
> @@ -0,0 +1,72 @@
> +/*
> + * (C) Copyright 2013 Altera Corporation <www.altera.com>
> + *
> + * SPDX-License-Identifier: GPL-2.0+
> + */
> +
> +#include <common.h>
> +#include <malloc.h>
> +#include <dwmmc.h>
> +#include <asm/arch/dwmmc.h>
> +
> +#define CLKMGR_PERPLLGRP_EN_REG (SOCFPGA_CLKMGR_ADDRESS + 0xA0)
> +#define CLKMGR_SDMMC_CLK_ENABLE (1 << 8)
> +#define SYSMGR_SDMMCGRP_CTRL_REG (SOCFPGA_SYSMGR_ADDRESS + 0x108)
Where is SOCFPGA_CLKMGR_ADDRESS defined?
> +#define SYSMGR_SDMMC_CTRL_GET_DRVSEL(x) (((x) >> 0) & 0x7)
((x) & 0x7) is more readable?
> +#define SYSMGR_SDMMC_CTRL_SET(smplsel, drvsel) \
> + ((((drvsel) << 0) & 0x7) | (((smplsel) << 3) & 0x38))
> +
> +static char *SOCFPGA_NAME = "SOCFPGA DWMMC";
> +
> +static void socfpga_dwmci_clksel(struct dwmci_host *host)
> +{
> + unsigned int en;
> + unsigned int drvsel;
> + unsigned int smplsel;
> +
> + /* Disable SDMMC clock. */
> + en = readl(CLKMGR_PERPLLGRP_EN_REG);
> + en &= ~CLKMGR_SDMMC_CLK_ENABLE;
> + writel(en, CLKMGR_PERPLLGRP_EN_REG);
> +
> + /* Configures drv_sel and smpl_sel */
> + drvsel = 3;
> + smplsel = 0;
Is this value static? then why is value assigned drvsel and smpsel at here?
I didn't know that SOCFPGA is only used with drvsel = 3, smplsel = 0.
But if you need to change this value for other SoC version in future, I think
that hard coding is not good.
> +
> + debug("%s: drvsel %d smplsel %d\n", __FUNCTION__, drvsel, smplsel);
> + writel(SYSMGR_SDMMC_CTRL_SET(smplsel, drvsel),
> + SYSMGR_SDMMCGRP_CTRL_REG);
> +
> + debug("%s: SYSMGR_SDMMCGRP_CTRL_REG = 0x%x\n", __FUNCTION__,
> + readl(SYSMGR_SDMMCGRP_CTRL_REG));
> + /* Enable SDMMC clock */
> + en = readl(CLKMGR_PERPLLGRP_EN_REG);
> + en |= CLKMGR_SDMMC_CLK_ENABLE;
> + writel(en, CLKMGR_PERPLLGRP_EN_REG);
> +}
> +
> +int socfpga_dwmmc_init(u32 regbase, int bus_width, int index)
> +{
> + struct dwmci_host *host = NULL;
> + host = calloc(sizeof(struct dwmci_host), 1);
> + if (!host) {
> + printf("dwmci_host calloc fail!\n");
> + return 1;
> + }
> +
> + host->name = SOCFPGA_NAME;
> + host->ioaddr = (void *)regbase;
> + host->buswidth = bus_width;
> + host->clksel = socfpga_dwmci_clksel;
> + host->dev_index = index;
> + /* fixed clock divide by 4 which due to the SDMMC wrapper */
> + host->bus_hz = CONFIG_DWMMC_BUS_HZ;
I didn't want to use the CONFIG_DWMMC_BUS_HZ.
> + host->fifoth_val = MSIZE(0x2) |
> + RX_WMARK(CONFIG_DWMMC_FIFO_DEPTH / 2 - 1) |
> + TX_WMARK(CONFIG_DWMMC_FIFO_DEPTH / 2);
> +
> + add_dwmci(host, host->bus_hz, 400000);
add_dwmci() has the return value.
Best Regards,
Jaehoon Chung
> +
> + return 0;
> +}
> +
>
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
