Hi Otavio, On 16/12/2013 23:44, Otavio Salvador wrote: > This patch fixes allow for the DeviceTree and initrd relocation fixing > the boot of FSL 3.10.9-1.0.0-alpha kernel. > > This changes following boards: > > - mx6sabreauto > - mx6sabresd > - wandboard > - udoo > - nitrogen6x > - cgtqmx6eval > > The reasoning, as explained by Hui Liu, is: > > ,---- > | The FDT blob will be placed at DDR physical addr: 0x11000000. When Linux > kernel > | Boot up, it will decompress the compressed kernel image and place the > decompressed > | kernel image at the low end of the DDR memory and start running from it. If > the > | decompressed kernel image is bigger for example than 16M, it may over > written the > | fdt blob which u-boot loaded to the DDR memory @0x11000000 with > fdt_addr=0x11000000 > | > | To expand the fdt_addr from 0x11000000 to 0x18000000, which can avoid the > override > | Since we will not likely have one kernel image larger than 128MB. > `---- > > Signed-off-by: Otavio Salvador <ota...@ossystems.com.br> > --- > Changes in v3: None > Changes in v2: > - Change loadaddr to allow use with more than 1G of RAM > > include/configs/cgtqmx6eval.h | 2 +- > include/configs/mx6sabre_common.h | 2 +- > include/configs/nitrogen6x.h | 2 +- > include/configs/udoo.h | 2 +- > include/configs/wandboard.h | 2 +- > 5 files changed, 5 insertions(+), 5 deletions(-) > > diff --git a/include/configs/cgtqmx6eval.h b/include/configs/cgtqmx6eval.h > index d5db8f5..29a023c 100644 > --- a/include/configs/cgtqmx6eval.h > +++ b/include/configs/cgtqmx6eval.h > @@ -81,7 +81,7 @@ > "console=ttymxc1\0" \ > "fdt_high=0xffffffff\0" \ > "initrd_high=0xffffffff\0" \ > - "fdt_addr=0x11000000\0" \ > + "fdt_addr=0x18000000\0" \ > "boot_fdt=try\0" \ > "mmcdev=1\0" \ > "mmcpart=1\0" \ > diff --git a/include/configs/mx6sabre_common.h > b/include/configs/mx6sabre_common.h > index a214324..d6ebf83 100644 > --- a/include/configs/mx6sabre_common.h > +++ b/include/configs/mx6sabre_common.h > @@ -116,7 +116,7 @@ > "script=boot.scr\0" \ > "uimage=uImage\0" \ > "fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \ > - "fdt_addr=0x11000000\0" \ > + "fdt_addr=0x18000000\0" \ > "boot_fdt=try\0" \ > "ip_dyn=yes\0" \ > "console=" CONFIG_CONSOLE_DEV "\0" \ > diff --git a/include/configs/nitrogen6x.h b/include/configs/nitrogen6x.h > index 957dabe..41a6d71 100644 > --- a/include/configs/nitrogen6x.h > +++ b/include/configs/nitrogen6x.h > @@ -179,7 +179,7 @@ > "fdt_high=0xffffffff\0" \ > "initrd_high=0xffffffff\0" \ > "fdt_file=imx6q-sabrelite.dtb\0" \ > - "fdt_addr=0x11000000\0" \ > + "fdt_addr=0x18000000\0" \ > "boot_fdt=try\0" \ > "ip_dyn=yes\0" \ > "mmcdev=0\0" \ > diff --git a/include/configs/udoo.h b/include/configs/udoo.h > index b9a493c..c187361 100644 > --- a/include/configs/udoo.h > +++ b/include/configs/udoo.h > @@ -93,7 +93,7 @@ > "fdt_high=0xffffffff\0" \ > "initrd_high=0xffffffff\0" \ > "fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \ > - "fdt_addr=0x11000000\0" \ > + "fdt_addr=0x18000000\0" \ > "boot_fdt=try\0" \ > "ip_dyn=yes\0" \ > "mmcdev=0\0" \ > diff --git a/include/configs/wandboard.h b/include/configs/wandboard.h > index 85f3c16..5252705 100644 > --- a/include/configs/wandboard.h > +++ b/include/configs/wandboard.h > @@ -120,7 +120,7 @@ > "fdt_high=0xffffffff\0" \ > "initrd_high=0xffffffff\0" \ > "fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \ > - "fdt_addr=0x11000000\0" \ > + "fdt_addr=0x18000000\0" \ > "boot_fdt=try\0" \ > "ip_dyn=yes\0" \ > "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \ >
We discussed in a previous thread why this is the preferred solution, instead of simply dropping fdt_addr as we initially thought - see Tom's remark in the thread. Acked-by: Stefano Babic <sba...@denx.de> Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de ===================================================================== _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
