On Wed, 2013-12-11 at 12:02 +0100, micro1183 wrote:
> Microns MT29F8G08 8GBit flash is not identified correctly.
> Manufacturer ID is 0x2c, device ID is 0x38
>
> Signed-off-by: Lothar Felten <lothar.fel...@gmail.com>
> CC: scottw...@freescale.com
>
> ---
> drivers/mtd/nand/nand_ids.c | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/drivers/mtd/nand/nand_ids.c b/drivers/mtd/nand/nand_ids.c
> index f3f0cb6..a43d0e8 100644
> --- a/drivers/mtd/nand/nand_ids.c
> +++ b/drivers/mtd/nand/nand_ids.c
> @@ -108,6 +108,7 @@ const struct nand_flash_dev nand_flash_ids[] = {
> /* 8 Gigabit */
> {"NAND 1GiB 1,8V 8-bit", 0xA3, 0, 1024, 0, LP_OPTIONS},
> {"NAND 1GiB 3,3V 8-bit", 0xD3, 0, 1024, 0, LP_OPTIONS},
> + {"NAND 1GiB 3,3V 8-bit", 0x38, 0, 1024, 0, LP_OPTIONS},
> {"NAND 1GiB 1,8V 16-bit", 0xB3, 0, 1024, 0, LP_OPTIONS16},
> {"NAND 1GiB 3,3V 16-bit", 0xC3, 0, 1024, 0, LP_OPTIONS16},
>
Is this an ONFI flash? If so, use that instead of the ID table.
-Scott
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
