If the PHY is not recognized don't access phydev (NULL)
and return 0 to signal failure.
Signed-off-by: Claudiu Manoil <claudiu.man...@freescale.com>
---
drivers/net/tsec.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/net/tsec.c b/drivers/net/tsec.c
index e9138f0..65fb2b0 100644
--- a/drivers/net/tsec.c
+++ b/drivers/net/tsec.c
@@ -590,6 +590,8 @@ static int init_phy(struct eth_device *dev)
tsec_configure_serdes(priv);
phydev = phy_connect(priv->bus, priv->phyaddr, dev, priv->interface);
+ if (!phydev)
+ return 0;
phydev->supported &= supported;
phydev->advertising = phydev->supported;
--
1.7.11.7
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
