In config_cmd_default.h, it will use CONFIG_SYS_NO_FLASH to decide whether include CONFIG_CMD_FLASH and CONFIG_CMD_IMLS. So, move the CONFIG_SYS_NO_FLASH to proper position, then we don't need to undef these two commands.
Signed-off-by: Bo Shen <voice.s...@atmel.com> --- include/configs/at91sam9x5ek.h | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) diff --git a/include/configs/at91sam9x5ek.h b/include/configs/at91sam9x5ek.h index 4eeaf3b..f0a6757 100644 --- a/include/configs/at91sam9x5ek.h +++ b/include/configs/at91sam9x5ek.h @@ -61,14 +61,15 @@ #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_HOSTNAME +/* no NOR flash */ +#define CONFIG_SYS_NO_FLASH + /* * Command line configuration. */ #include <config_cmd_default.h> #undef CONFIG_CMD_FPGA #undef CONFIG_CMD_IMI -#undef CONFIG_CMD_IMLS -#undef CONFIG_CMD_LOADS #define CONFIG_CMD_PING #define CONFIG_CMD_DHCP @@ -100,9 +101,6 @@ #define CONFIG_SF_DEFAULT_SPEED 30000000 #endif -/* no NOR flash */ -#define CONFIG_SYS_NO_FLASH - /* NAND flash */ #ifdef CONFIG_CMD_NAND #define CONFIG_NAND_ATMEL -- 1.7.9.5 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
