On BSC9131 and BSC9132: For High Capacity SD Cards (> 2 GBytes), the
32-bit source address specifies the memory address in block address
format. Block length is fixed to 512 bytes as per the SD High Capacity
specification. So we need to convert the block address format
to byte address format to calculate the envaddr.

If there is no enough space for environment variables or envaddr
is larger than 4GiB, we relocate the envaddr to 0x400. The address
relocated is in the front of the first partition that is assigned
for sdboot only.

Signed-off-by: Haijun Zhang <haijun.zh...@freescale.com>
---
 board/freescale/common/sdhc_boot.c | 31 +++++++++++++++++++++++++++++++
 1 file changed, 31 insertions(+)

diff --git a/board/freescale/common/sdhc_boot.c 
b/board/freescale/common/sdhc_boot.c
index f6e2b2b..9dc9988 100644
--- a/board/freescale/common/sdhc_boot.c
+++ b/board/freescale/common/sdhc_boot.c
@@ -16,6 +16,9 @@
 #define ESDHC_BOOT_IMAGE_SIZE  0x48
 #define ESDHC_BOOT_IMAGE_ADDR  0x50
 
+#define ESDHC_DEFAULT_ENVADDR  0x400
+#define UINT_MAX               0xFFFFFFFF
+
 int mmc_get_env_addr(struct mmc *mmc, int copy, u32 *env_addr)
 {
        u8 *tmp_buf;
@@ -39,6 +42,34 @@ int mmc_get_env_addr(struct mmc *mmc, int copy, u32 
*env_addr)
        /* Get the code size from offset 0x48 */
        code_len = *(u32 *)(tmp_buf + ESDHC_BOOT_IMAGE_SIZE);
 
+       /*
+        * On soc BSC9131, BSC9132:
+        * In High Capacity SD Cards (> 2 GBytes), the 32-bit source address and
+        * code length of these soc specify the memory address in block address
+        * format. Block length is fixed to 512 bytes as per the SD High
+        * Capacity specification.
+        */
+       if ((SVR_SOC_VER(get_svr()) == SVR_9131) ||
+                       (SVR_SOC_VER(get_svr()) == SVR_9132)) {
+               u64 tmp;
+
+               if (mmc->high_capacity) {
+                       tmp = (u64)code_offset * blklen;
+                       tmp += code_len * blklen;
+               } else
+                       tmp = code_offset + code_len;
+
+               if (((tmp + CONFIG_ENV_SIZE) > mmc->capacity) ||
+                               (tmp > UINT_MAX))
+                       *env_addr = ESDHC_DEFAULT_ENVADDR;
+               else
+                       *env_addr = tmp;
+
+               free(tmp_buf);
+
+               return 0;
+       }
+
        *env_addr = code_offset + code_len;
 
        free(tmp_buf);
-- 
1.8.4


_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to