Dear Vladimir Zapolskiy,
> For LPC32XX high-speed UART it is required to send a carriage return
> symbol along with line feed.
Why ?
> The problem was introduced in e503f90a
> commit.
>
> Signed-off-by: Vladimir Zapolskiy <v...@mleia.com>
> Cc: Marek Vasut <ma...@denx.de>
> ---
> drivers/serial/lpc32xx_hsuart.c | 3 +++
> 1 file changed, 3 insertions(+)
>
> diff --git a/drivers/serial/lpc32xx_hsuart.c
> b/drivers/serial/lpc32xx_hsuart.c index 9c7c621..c8926a8 100644
> --- a/drivers/serial/lpc32xx_hsuart.c
> +++ b/drivers/serial/lpc32xx_hsuart.c
> @@ -38,6 +38,9 @@ static int lpc32xx_serial_getc(void)
>
> static void lpc32xx_serial_putc(const char c)
> {
> + if (c == '\n')
> + serial_putc('\r');
> +
> writel(c, &hsuart->tx);
>
> /* Wait for character to be sent */
btw. I have a feeling each and every driver does send CR-LF combo and emulates
it this way. Maybe this should eventually go into common code ? But that's just
a suggestion for future improvement.
Best regards,
Marek Vasut
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
