This sends all the patches I've been keeping in my tree and are awaiting to be applied. Basically:
* Wandboard LCD support and environment changes * mx28evk environment changes * SabreSD eMMC installation support * IOMUX fix * FDT loadaddr fix Changes in v2: - Change loadaddr to allow use with more than 1G of RAM Otavio Salvador (9): wandboard: add Future Eletronics 7" WVGA LCD extension board wandboard: Use '0' as bootdelay but interruptable wandboard: Pass 'quiet' bootparam by default mx6sabresd: Add eMMC specific environment to allow U-Boot update imx: Easy enabling of SION per-pin using MUX_MODE_SION helper macro mx28evk: Use 512k for fdt partition to align it mx28evk: Add 'nandboot' environment command mx28evk: Extend environment to easy write of NAND system ARM: mx6: Change the FDT loading address to avoid overlaping arch/arm/include/asm/imx-common/iomux-v3.h | 2 + board/wandboard/wandboard.c | 240 ++++++++++++++++++++++++++--- include/configs/cgtqmx6eval.h | 2 +- include/configs/mx28evk.h | 55 ++++++- include/configs/mx6sabre_common.h | 25 ++- include/configs/mx6sabresd.h | 2 + include/configs/nitrogen6x.h | 2 +- include/configs/udoo.h | 2 +- include/configs/wandboard.h | 40 ++++- 9 files changed, 337 insertions(+), 33 deletions(-) -- 1.8.4.3 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
