On 11/27/2013 07:12 PM, Enric Balletbo Serra wrote:
Hi all,

2013/11/27 Nikita Kiryanov <nik...@compulab.co.il>:
On 11/27/2013 06:10 PM, Thomas Petazzoni wrote:

Dear Nikita Kiryanov,

On Wed, 27 Nov 2013 17:52:31 +0200, Nikita Kiryanov wrote:

The zeroing of the cnt register also happens in other places in the
driver, and it is entirely possible that they should be removed for
OMAP3s as well.

In my patch I removed it only for i2c_write() because the original
driver also zeroed the cnt register in I/O functions- except in
i2c_write(), and I decided to follow the original driver's lead.

What happens if you remove all the lines that zero the cnt register?


It works. I've removed all the writew(0, ...cnt register...), and then
I've done at least 20 boots of the IGEP board, and all of them were
successful.

I've attached the ugly patch that comments out all of those cases. Of
course, it's not a patch intended for merging, just to show which
locations I've commented.

Since I've absolutely no idea of the background for the problem, would
you mind submitting a proper patch with a good explanation? I will be
happy to test it, of course.


Sure. I'm about to leave office though, so I'll prepare it tomorrow.


Thanks!

Thomas



--
Regards,
Nikita.


Maybe I'm wrong but I think the problem could be related to that
OMAP3430 and OMAP3630 has a different I2C revision and current code
don't handle this correctly, As I know the I2C revision on OMAP3630
and OMAP4 is the same but different than OMAP3530. If the Tom's board
uses the OMAP3530 processor this will explain why he's not affected
for the issue. Others like me and Thomas, using DM3730, have the
problem because the driver do not handle this, it supposes that we're
using an OMAP3530.

Well, this issue is mentioned in the errata for both OMAP3530 and
DM3730, and the TRM for OMAP4430 mentions the same thing. It seems to me
that the zeroing of cnt register being problematic is something the
different OMAPs have in common.

Either way, these lines seem unnecessary, so I'm still in favor of
removing them.


Best regards,
    Enric


--
Regards,
Nikita.
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to