Hi list, I use "sf erase" + "sf write" commands to write root image to spi nor flash. It works for writing a ext2 image. However, if I use the same commands to write a jffs2 image I got a lot of "Magic bitmask 0x1985 not found at..." messages and "jffs2: inflate returned -3".
jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0012f780: 0x4bbb instead jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0012f784: 0x50f2 instead jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0012f788: 0x4230 instead jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0012f78c: 0x76ac instead jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0012f790: 0x439c instead jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0012f794: 0xd9b9 instead jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0012f798: 0x73d3 instead jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0012f79c: 0x5758 instead jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0012f7a0: 0x1b47 instead jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0012f7a4: 0xf908 instead jffs2: Further such events for this erase block will not be printed So how to correctly write a jffs2 image to spi nor flash in u-boot? Thanks, Axel _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
