MEM_PLL_RAT on T4240/T4160 Rev2.0 uses a value which is half of Rev1.0.
It's 12 in Rev1.0, for Rev2.0 it uses 6.
Signed-off-by: Roy Zang <tie-fei.z...@freescale.com>
Signed-off-by: Shaohui Xie <shaohui....@freescale.com>
Reviewed-by: Yusong Sun <york...@freescale.com>
---
arch/powerpc/cpu/mpc85xx/speed.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/powerpc/cpu/mpc85xx/speed.c b/arch/powerpc/cpu/mpc85xx/speed.c
index 1a58a19..46ae80c 100644
--- a/arch/powerpc/cpu/mpc85xx/speed.c
+++ b/arch/powerpc/cpu/mpc85xx/speed.c
@@ -86,6 +86,14 @@ void get_sys_info(sys_info_t *sys_info)
mem_pll_rat = (in_be32(&gur->rcwsr[0]) >>
FSL_CORENET_RCWSR0_MEM_PLL_RAT_SHIFT)
& FSL_CORENET_RCWSR0_MEM_PLL_RAT_MASK;
+ /* T4240/T4160 Rev2.0 MEM_PLL_RAT uses a value which is half of
+ * T4240/T4160 Rev1.0. eg. It's 12 in Rev1.0, however, for Rev2.0
+ * it uses 6.
+ */
+#if defined(CONFIG_PPC_T4240) || defined(CONFIG_PPC_T4160)
+ if (SVR_MAJ(get_svr()) >= 2)
+ mem_pll_rat *= 2;
+#endif
if (mem_pll_rat > 2)
sys_info->freq_ddrbus *= mem_pll_rat;
else
--
1.7.9.5
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
