The Versatiles come up with the primary UART set to ttyAMA0 at 38400 baud, and unless we pass this to the kernel it will assume it is set to 9600 baud which will be quite awkward for the terminal, let's try to be helpful and inform the kernel what setting is used.
Cc: Stefano Babic <sba...@denx.de> Cc: Marek Vasut <ma...@denx.de> Signed-off-by: Linus Walleij <linus.wall...@linaro.org> --- include/configs/versatile.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/include/configs/versatile.h b/include/configs/versatile.h index 10738ac24be0..29c32fee5178 100644 --- a/include/configs/versatile.h +++ b/include/configs/versatile.h @@ -101,7 +101,8 @@ #define CONFIG_BOOTDELAY 2 #define CONFIG_BOOTARGS "root=/dev/nfs mem=128M ip=dhcp "\ - "netdev=25,0,0xf1010000,0xf1010010,eth0" + "netdev=25,0,0xf1010000,0xf1010010,eth0 "\ + "console=ttyAMA0,38400n1" /* * Static configuration when assigning fixed address -- 1.8.3.1 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
