Dear Jean-Christophe PLAGNIOL-VILLARD,
In message <20090417195540.ga9...@game.jcrosoft.org> you wrote:
>
> please pull
>
> The following changes since commit 7ee38c044ca5041d3378d6507580ea4ec344af96:
> David Brownell (1):
> fix DaVinci NS16550_REG_SIZE regression
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-at91.git master
>
> Ilko Iliev (1):
> at91: add support for the PM9263 board of Ronetix GmbH
>
> Jean-Christophe PLAGNIOL-VILLARD (2):
> at91sam9/at91cap: improve clock framework
> at91sam9/at91cap: fix CONFIG_SYS_HZ to 1000
>
> MAINTAINERS | 4 +
> MAKEALL | 1 +
> Makefile | 4 +
> board/atmel/at91cap9adk/at91cap9adk.c | 3 +-
> board/atmel/at91sam9261ek/at91sam9261ek.c | 3 +-
> board/atmel/at91sam9263ek/at91sam9263ek.c | 3 +-
> board/atmel/at91sam9rlek/at91sam9rlek.c | 3 +-
> board/ronetix/pm9263/Makefile | 61 +++
> board/ronetix/pm9263/config.mk | 1 +
> .../at91/u-boot.lds => board/ronetix/pm9263/led.c | 50 +--
> board/ronetix/pm9263/lowlevel_init.S | 279 +++++++++++++
> board/ronetix/pm9263/partition.c | 47 +++
> board/ronetix/pm9263/pm9263.c | 413
> ++++++++++++++++++++
> cpu/arm926ejs/at91/Makefile | 7 +-
> cpu/arm926ejs/at91/clock.c | 202 ++++++++++
> cpu/arm926ejs/at91/config.mk | 2 +-
> cpu/arm926ejs/at91/cpu.c | 14 +
> cpu/arm926ejs/at91/lowlevel_init.S | 2 +
> cpu/arm926ejs/at91/timer.c | 82 ++--
> cpu/arm926ejs/at91/{u-boot.lds => u-boot.lds.S} | 9 +-
> drivers/spi/atmel_dataflash_spi.c | 7 +-
> drivers/usb/host/ohci-at91.c | 3 +-
> include/asm-arm/arch-at91/at91_pmc.h | 30 +-
> include/asm-arm/arch-at91/at91sam9263.h | 1 +
> include/asm-arm/arch-at91/at91sam9_sdramc.h | 87 ++++
> include/asm-arm/arch-at91/clk.h | 19 +-
> include/asm-arm/arch-at91/hardware.h | 20 +
> include/asm-arm/u-boot-arm.h | 3 +
> include/configs/afeb9260.h | 7 +-
> include/configs/at91cap9adk.h | 8 +-
> include/configs/at91sam9260ek.h | 10 +-
> include/configs/at91sam9261ek.h | 7 +-
> include/configs/at91sam9263ek.h | 8 +-
> include/configs/at91sam9rlek.h | 7 +-
> include/configs/pm9263.h | 367 +++++++++++++++++
> lib_arm/board.c | 3 +
> tools/Makefile | 3 +
> tools/logos/ronetix.bmp | Bin 0 -> 5638 bytes
> 38 files changed, 1652 insertions(+), 128 deletions(-)
> create mode 100644 board/ronetix/pm9263/Makefile
> create mode 100644 board/ronetix/pm9263/config.mk
> copy cpu/arm926ejs/at91/u-boot.lds => board/ronetix/pm9263/led.c (55%)
> create mode 100644 board/ronetix/pm9263/lowlevel_init.S
> create mode 100644 board/ronetix/pm9263/partition.c
> create mode 100644 board/ronetix/pm9263/pm9263.c
> create mode 100644 cpu/arm926ejs/at91/clock.c
> create mode 100644 cpu/arm926ejs/at91/cpu.c
> rename cpu/arm926ejs/at91/{u-boot.lds => u-boot.lds.S} (90%)
> create mode 100644 include/asm-arm/arch-at91/at91sam9_sdramc.h
> create mode 100644 include/configs/pm9263.h
> create mode 100644 tools/logos/ronetix.bmp
Done, thanks.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de
[Braddock:] Mr. Churchill, you are drunk.
[Churchill:] And you madam, are ugly. But I shall be sober tomorrow.
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
