Hi,
2013/11/18 Masahiro Yamada <[email protected]>: > Hello Nobuhiro > > I cannot compile sh7752evb and sh7757lcr boards > because of the following error: > > sh_eth.c: In function 'sh_eth_send': > sh_eth.c:57:2: warning: implicit declaration of function 'dcache_wback_range' > [-Wimplicit-function-declaration] > drivers/net/built-in.o: In function `sh_eth_send': > /home/masahiro/u-boot-log/u-boot-4/drivers/net/sh_eth.c:87: undefined > reference to `dcache_wback_range' > drivers/net/built-in.o: In function `sh_eth_rx_desc_init': > /home/masahiro/u-boot-log/u-boot-4/drivers/net/sh_eth.c:276: undefined > reference to `dcache_wback_range' > > > I grepped the whole tree and the definition of "dcache_wback_range" > function is surely missing. > > Unfortunately, no board maintainter is assigned for these two boards. > Could you fix them? > Or if you can't fix this issue, please both of the two boards. > > Yes , I know. And I already send patches to net maintainer. http://patchwork.ozlabs.org/patch/268947/ But these are not applied. > And we have newly another warning message: > > time.c:14:2: warning: #warning "CONFIG_SYS_HZ must be 1000 and should not be > defined by platforms" [-Wcpp] > for rsk7203, rsk7264, rsk7269 boards. > > We need to fix boards which use CONFIG_SYS_HZ other than 1000. > Yes , I know too. I am working about this. > > Best Regards > Masahiro Yamada > Best regards, Nobuhiro _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
