This series adds support for two environment variables that are
useful for use in scripting startup of an O/S in general, and
specifically in computing DTB names.
Patches 1 and 2 implement the feature through arch_misc_init(), but
don't enable it.
Patch 3 overrides board_name for the nitrogen6x board file, which is
used for both Nitrogen6X and SABRE Lite boards.
Patch 4 enables the feature for nitrogen6x
Patch 5 enables the feature for Freescale mx6*sabre* boards
V3 reworks things completely based on feedback from the mailing list.
In particular:
-- the variable names were changes from "cpu" and "board" to
"imx_type" and "board_name"
-- the arch_misc_init() routine was added
-- SABRE Lite environment was changed to use the feature
Eric Nelson (5):
i.MX5x: define cpu_type() to return processor portion of cpu rev.
imx: Define common routines to set cpu and board environment variables
i.MX6: nitrogen6x/sabrelite: override set_board_name()
i.MX6: nitrogen6x/sabrelite: initialize imx_type and board_name values
i.MX6: mx6*sabre*: initialize imx_type and board_name values
arch/arm/imx-common/cpu.c | 24 ++++++++++++++++++++++--
arch/arm/include/asm/arch-mx5/sys_proto.h | 4 ++++
board/boundary/nitrogen6x/nitrogen6x.c | 14 +++++++++++++-
include/configs/mx6sabre_common.h | 1 +
include/configs/nitrogen6x.h | 9 ++++++++-
5 files changed, 48 insertions(+), 4 deletions(-)
--
1.8.1.2
_______________________________________________
U-Boot mailing list
[email protected]
http://lists.denx.de/mailman/listinfo/u-boot
