(Cc:ing Andre and Christoffer as they have discussed HYP on the ML.) Hello,
I am working on changing the way IRQ/FIQ stacks are set up, from "on-the-fly in a hurry while in the handler" to "during init, so that when entering the handler, the stack is already correct". Setting the stack then requires switching from the current mode (in most cases, SVC32, 0x13) to IRQ (0x11) or FIQ (0x12) mode, in order to set the right banked SP, then back into the original mode. However, in the first lines of reset in arch/arm/cpu/armv7/start.S, the possibility of U-Boot being started in HYP mode (0x1A) is considered and, if in HYP mode, no switch to SVC32 is performed. I understand that the problem here is, if we drop from HYP to SVC32, then we cannot go back to HYP, and we want to be able to remain in HYP. Does this also apply to dropping from HYP to IRQ or FIQ mode, i.e., if we do such a drop, are we prevented from rising back from IRQ or FIQ mode to HYP? I seem to remember such an issue, but I am no specialist in HYP, so any help is welcome. Amicalement, -- Albert. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
