Align the ATA ID buffer to the cache-line boundary. This gets rid
of the below error mesages on ARM v7 platforms.
scanning bus for devices...
ERROR: v7_dcache_inval_range - start address is not aligned - 0xfee48618
ERROR: v7_dcache_inval_range - stop address is not aligned - 0xfee48818
CC: Aneesh V <ane...@ti.com>
Signed-off-by: Roger Quadros <rog...@ti.com>
---
drivers/block/ahci.c | 8 +-------
1 file changed, 1 insertion(+), 7 deletions(-)
diff --git a/drivers/block/ahci.c b/drivers/block/ahci.c
index e24d634..e64df4f 100644
--- a/drivers/block/ahci.c
+++ b/drivers/block/ahci.c
@@ -623,7 +623,7 @@ static int ata_scsiop_inquiry(ccb *pccb)
95 - 4,
};
u8 fis[20];
- u16 *tmpid;
+ ALLOC_CACHE_ALIGN_BUFFER(u16, tmpid, ATA_ID_WORDS);
u8 port;
/* Clean ccb data buffer */
@@ -642,16 +642,10 @@ static int ata_scsiop_inquiry(ccb *pccb)
/* Read id from sata */
port = pccb->target;
- tmpid = malloc(ATA_ID_WORDS * 2);
- if (!tmpid) {
- printf("%s: No memory for tmpid\n", __func__);
- return -ENOMEM;
- }
if (ahci_device_data_io(port, (u8 *) &fis, sizeof(fis), (u8 *)tmpid,
ATA_ID_WORDS * 2, 0)) {
debug("scsi_ahci: SCSI inquiry command failure.\n");
- free(tmpid);
return -EIO;
}
--
1.8.3.2
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
