Grepping all I found was board/mpl/common/isa.c which seems to do
something similar. However calling this a driver is quite generous - all
it does it write some board-specific values to some registers. So
there's really not much to be shared.
Thanks,
Paul
On 10/11/13 20:06, Marek Vasut wrote:
Dear Paul Burton,
On a real Malta the Super I/O needs to be configured before we are able
to access the UARTs. This patch performs that configuration, setting up
the UARTs in the same way that YAMON would.
[...]
--- /dev/null
+++ b/board/imgtec/malta/superio.c
Do we not already have some kind of a superIO controller driver in U-Boot ? Just
wondering, I seem to remember seeing a few. Is this driver re-usable by other
boards too maybe?
Best regards,
Marek Vasut
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
