Update the code that builds the pci endpoint liodn
offset list so that it doesn't overlap with other
liodns and doesn't generate negative offsets like:
fsl,liodn-offset-list = <0 0xffffffcd 0xffffffcf
0xffffffd1 0xffffffd3
0xffffffd5 0xffffffd7
0xffffffd9 0xffffffdb>;
The update consists in adding a parameter to the
function that builds the list to specify the base
liodn.
On PCI v2.4 use the old base = 256 and, on PCI 3.0
where some of the PCIE liodns are larger than 256,
use a base = 1024. The version check is based on
the PCI controller's version register.
Signed-off-by: Laurentiu Tudor <laurentiu.tu...@freescale.com>
Cc: Scott Wood <scottw...@freescale.com>
Cc: York Sun <york...@freescale.com>
---
Based on: git://git.denx.de/u-boot-mpc85xx.git master
arch/powerpc/cpu/mpc85xx/liodn.c | 25 +++++++++++++++++++++----
arch/powerpc/include/asm/immap_85xx.h | 4 +++-
2 files changed, 24 insertions(+), 5 deletions(-)
diff --git a/arch/powerpc/cpu/mpc85xx/liodn.c b/arch/powerpc/cpu/mpc85xx/liodn.c
index 4b00da9..19e130e 100644
--- a/arch/powerpc/cpu/mpc85xx/liodn.c
+++ b/arch/powerpc/cpu/mpc85xx/liodn.c
@@ -239,9 +239,9 @@ static void fdt_fixup_srio_liodn(void *blob, struct
srio_liodn_id_table *tbl)
#endif
#define CONFIG_SYS_MAX_PCI_EPS 8
-#define CONFIG_SYS_PCI_EP_LIODN_START 256
-static void fdt_fixup_pci_liodn_offsets(void *fdt, const char *compat)
+static void fdt_fixup_pci_liodn_offsets(void *fdt, const char *compat,
+ int ep_liodn_start)
{
int off, pci_idx = 0, pci_cnt = 0, i, rc;
const uint32_t *base_liodn;
@@ -271,7 +271,7 @@ static void fdt_fixup_pci_liodn_offsets(void *fdt, const
char *compat)
continue;
}
for (i = 0; i < CONFIG_SYS_MAX_PCI_EPS; i++)
- liodn_offs[i + 1] = CONFIG_SYS_PCI_EP_LIODN_START +
+ liodn_offs[i + 1] = ep_liodn_start +
i * pci_cnt + pci_idx - *base_liodn;
rc = fdt_setprop(fdt, off, "fsl,liodn-offset-list",
liodn_offs, sizeof(liodn_offs));
@@ -338,5 +338,22 @@ void fdt_fixup_liodn(void *blob)
fdt_fixup_liodn_tbl(blob, rman_liodn_tbl, rman_liodn_tbl_sz);
#endif
- fdt_fixup_pci_liodn_offsets(blob, "fsl,qoriq-pcie-v2.4");
+ ccsr_pcix_t *pcix = (ccsr_pcix_t *)CONFIG_SYS_PCIE1_ADDR;
+ int pci_ver = pcix->ipver1 & 0xffff, liodn_base = 0;
+
+ if (pci_ver >= 0x0204) {
+ if (pci_ver >= 0x0300)
+ liodn_base = 1024;
+ else
+ liodn_base = 256;
+ }
+
+ if (liodn_base) {
+ char compat[32];
+
+ sprintf(compat, "fsl,qoriq-pcie-v%d.%d",
+ (pci_ver & 0xff00) >> 8, pci_ver & 0xff);
+ fdt_fixup_pci_liodn_offsets(blob, compat, liodn_base);
+ fdt_fixup_pci_liodn_offsets(blob, "fsl,qoriq-pcie", liodn_base);
+ }
}
diff --git a/arch/powerpc/include/asm/immap_85xx.h
b/arch/powerpc/include/asm/immap_85xx.h
index e516e07..a087b8c 100644
--- a/arch/powerpc/include/asm/immap_85xx.h
+++ b/arch/powerpc/include/asm/immap_85xx.h
@@ -282,7 +282,9 @@ typedef struct ccsr_pcix {
u32 int_ack; /* PCIX IRQ Acknowledge */
u8 res000c[52];
u32 liodn_base; /* PCIX LIODN base register */
- u8 res0044[3004];
+ u8 res0044[2996];
+ u32 ipver1; /* PCIX IP block revision register 1 */
+ u32 ipver2; /* PCIX IP block revision register 2 */
u32 potar0; /* PCIX Outbound Transaction Addr 0 */
u32 potear0; /* PCIX Outbound Translation Extended Addr 0 */
u32 powbar0; /* PCIX Outbound Window Base Addr 0 */
--
1.7.6.5
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
