This patchset adds support for the Future Eletronics 7" WVGA LCD extension board and implements its auto-detection using i2c to check for it's touch controller presence.
The IOMUXC change is included here as it makes both SoC type MUX settings in line to each other and took a while to figure out why it worked with one and failed with another SoC. Otavio Salvador (4): mx6: Remove PAD_CTL_DSE_120ohm from i.MX6DL's IPU1_DI0_PIN4 pin wandboard: add Future Eletronics 7" WVGA LCD extension board wandboard: Use '0' as bootdelay but interruptable wandboard: Pass 'quiet' bootparam by default arch/arm/include/asm/arch-mx6/mx6dl_pins.h | 2 +- board/wandboard/wandboard.c | 238 ++++++++++++++++++++++++++--- include/configs/wandboard.h | 38 ++++- 3 files changed, 254 insertions(+), 24 deletions(-) -- 1.8.4.rc3 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
