Hi Michael, On Wed, Oct 16, 2013 at 1:28 PM, Heiko Schocher <h...@denx.de> wrote: > Hello Michael, > > Am 15.10.2013 22:23, schrieb Michael Burr: > >> This series of two patches contains improvements for the I2C driver on the >> Xilinx Zynq architecture. In general, the goals are: >>> >>> Support for both I2C bus masters ("I2C0" and "I2C1") in the Zynq PS. >>> Full support for bus multiplexers. >>> Support for all register-address sizes (0, 1, 2). >> >> >> The changes to file 'zynq_i2c.c' in this patch series are >> meant to be applied in order: in other words, first apply the >> changes from the PATCH 1/2 version; then apply the changes in the >> PATCH 2/2 version. >> >> v3: fixed mistake parsing PATCH 1/2 >> v4: _really_ fixed this time! >> v5: yet another try >> v6: one more time >> v7: again >> v8: last time (see comments in PATCH 1/2) > > > ? I am lost in space now ... you are sure this is the finally version? > Really tested? I have no chance to test your changes ...
Just confused this style of sending patches. Anyway I have tested on these on zynq boards, works fine. Any possibility to send these patches with next patch version so-that I will mark t-o-b. -- Thanks, Jagan. -------- Jagannadha Sutradharudu Teki, E: jagannadh.t...@gmail.com, P: +91-9676773388 Engineer - System Software Hacker U-boot - SPI Custodian and Zynq APSOC Ln: http://www.linkedin.com/in/jaganteki _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot