This series of two patches contains improvements for the I2C driver on the
Xilinx Zynq architecture. In general, the goals are:
Support for both I2C bus masters ("I2C0" and "I2C1") in the Zynq PS.
Full support for bus multiplexers.
Support for all register-address sizes (0, 1, 2).
The changes to file 'zynq_i2c.c' in this patch series are
meant to be applied in order: in other words, first apply the
changes from the PATCH 1/2 version; then apply the changes in the
PATCH 2/2 version.
v3: fixed mistake parsing PATCH 1/2
v4: _really_ fixed this time!
v5: yet another try
v6: one more time
v7: again
Michael Burr (2):
I2C: Zynq: Support for 0-length register address
I2C:Zynq: Adapt this driver to the new model
README | 9 +++
drivers/i2c/Makefile | 2 +-
drivers/i2c/zynq_i2c.c | 147
+++++++++++++++++++++++++++++-------------------
include/configs/zynq.h | 10 ++--
4 files changed, 102 insertions(+), 66 deletions(-)
--
1.7.9.5
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
