Don't run the memory POST on the NAND-booting version. It will
overwrite part of the U-Boot image which is already loaded from NAND
to SDRAM. We were just lucky that it booted at all with this SDRAM
test enabled.
Signed-off-by: Stefan Roese <s...@denx.de>
---
include/configs/kilauea.h | 13 ++++++++++++-
1 files changed, 12 insertions(+), 1 deletions(-)
diff --git a/include/configs/kilauea.h b/include/configs/kilauea.h
index 26cb854..97bac99 100644
--- a/include/configs/kilauea.h
+++ b/include/configs/kilauea.h
@@ -430,12 +430,23 @@
#define CONFIG_CMD_PCI
#define CONFIG_CMD_SNTP
+/*
+ * Don't run the memory POST on the NAND-booting version. It will
+ * overwrite part of the U-Boot image which is already loaded from NAND
+ * to SDRAM.
+ */
+#if defined(CONFIG_NAND_U_BOOT)
+#define CONFIG_SYS_POST_MEMORY_ON 0
+#else
+#define CONFIG_SYS_POST_MEMORY_ON CONFIG_SYS_POST_MEMORY
+#endif
+
/* POST support */
#define CONFIG_POST (CONFIG_SYS_POST_CACHE | \
CONFIG_SYS_POST_CPU | \
CONFIG_SYS_POST_ETHER | \
CONFIG_SYS_POST_I2C | \
- CONFIG_SYS_POST_MEMORY | \
+ CONFIG_SYS_POST_MEMORY_ON | \
CONFIG_SYS_POST_UART)
/* Define here the base-addresses of the UARTs to test in POST */
--
1.6.2.3
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
