Select GPIO1 as the USB OTG ID pin for Nitrogen6x
Signed-off-by: Troy Kisky <troy.ki...@boundarydevices.com>
---
v4: move the Nitrogen6x bits into this patch as well
v5: no change
---
arch/arm/include/asm/arch-mx6/iomux.h | 6 ++++++
board/boundary/nitrogen6x/nitrogen6x.c | 7 +++++++
2 files changed, 13 insertions(+)
diff --git a/arch/arm/include/asm/arch-mx6/iomux.h
b/arch/arm/include/asm/arch-mx6/iomux.h
index f4cfd4f..9e6d40f 100644
--- a/arch/arm/include/asm/arch-mx6/iomux.h
+++ b/arch/arm/include/asm/arch-mx6/iomux.h
@@ -10,6 +10,12 @@
#define MX6_IOMUXC_GPR7 0x020e001c
/*
+ * IOMUXC_GPR1 bit fields
+ */
+#define IOMUXC_GPR1_OTG_ID_ENET_RX_ERR (0<<13)
+#define IOMUXC_GPR1_OTG_ID_GPIO1 (1<<13)
+#define IOMUXC_GPR1_OTG_ID_MASK (1<<13)
+/*
* IOMUXC_GPR13 bit fields
*/
#define IOMUXC_GPR13_SDMA_STOP_REQ (1<<30)
diff --git a/board/boundary/nitrogen6x/nitrogen6x.c
b/board/boundary/nitrogen6x/nitrogen6x.c
index f664f6d..c6efafc 100644
--- a/board/boundary/nitrogen6x/nitrogen6x.c
+++ b/board/boundary/nitrogen6x/nitrogen6x.c
@@ -704,6 +704,13 @@ int overwrite_console(void)
int board_init(void)
{
+ struct iomuxc_base_regs *const iomuxc_regs
+ = (struct iomuxc_base_regs *)IOMUXC_BASE_ADDR;
+
+ clrsetbits_le32(&iomuxc_regs->gpr[1],
+ IOMUXC_GPR1_OTG_ID_MASK,
+ IOMUXC_GPR1_OTG_ID_GPIO1);
+
/* address of boot parameters */
gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
--
1.8.1.2
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
