Hi Prafulla, hi Albert, we are not so far away from v2013.10 I guess, so could one of you please pick of these small patch series? Thanks!
Note for this patch there is already a v2 posted which applies cleanly again. So there were: http://patchwork.ozlabs.org/patch/275613/ http://patchwork.ozlabs.org/patch/256901/ http://patchwork.ozlabs.org/patch/256900/ Regards Holger On 07/04/2013 03:29 PM, Holger Brunck wrote: > From: Karlheinz Jerg <karlheinz.j...@keymile.com> > > The board is similar to the standard km_kirkwood board. From a > u-boot point of view, the only difference is an increased > 256 MiB DRAM (128M16). A board based on this design is for > example the SUP12. > > Signed-off-by: Karlheinz Jerg <karlheinz.j...@keymile.com> > Signed-off-by: Holger Brunck <holger.bru...@keymile.com> > --- > boards.cfg | 1 + > include/configs/km_kirkwood.h | 10 ++++++++++ > 2 files changed, 11 insertions(+) > > diff --git a/boards.cfg b/boards.cfg > index c0c4282..2bb493f 100644 > --- a/boards.cfg > +++ b/boards.cfg > @@ -165,6 +165,7 @@ lschlv2 arm arm926ejs lsxl > buffalo > lsxhl arm arm926ejs lsxl > buffalo kirkwood lsxl:LSXHL > km_kirkwood arm arm926ejs km_arm > keymile kirkwood km_kirkwood:KM_KIRKWOOD > km_kirkwood_pci arm arm926ejs km_arm > keymile kirkwood km_kirkwood:KM_KIRKWOOD_PCI > +km_kirkwood_128m16 arm arm926ejs km_arm > keymile kirkwood km_kirkwood:KM_KIRKWOOD_128M16 > kmnusa arm arm926ejs km_arm > keymile kirkwood km_kirkwood:KM_NUSA > kmsuv31 arm arm926ejs km_arm > keymile kirkwood km_kirkwood:KM_SUV31 > mgcoge3un arm arm926ejs km_arm > keymile kirkwood km_kirkwood:KM_MGCOGE3UN > diff --git a/include/configs/km_kirkwood.h b/include/configs/km_kirkwood.h > index 83bb7aa..2b5f389 100644 > --- a/include/configs/km_kirkwood.h > +++ b/include/configs/km_kirkwood.h > @@ -51,6 +51,16 @@ > #define KM_IVM_BUS "pca9544a:70:9" /* I2C2 (Mux-Port 1)*/ > #define CONFIG_KM_FPGA_CONFIG > > +/* KM_KIRKWOOD_128M16 */ > +#elif defined(CONFIG_KM_KIRKWOOD_128M16) > +#define CONFIG_IDENT_STRING "\nKeymile Kirkwood 128M16" > +#define CONFIG_HOSTNAME km_kirkwood_128m16 > +#undef CONFIG_SYS_KWD_CONFIG > +#define CONFIG_SYS_KWD_CONFIG \ > + $(SRCTREE)/$(CONFIG_BOARDDIR)/kwbimage_128M16_1.cfg > +#define CONFIG_KM_DISABLE_PCIE > +#define KM_IVM_BUS "pca9544a:70:9" /* I2C2 (Mux-Port 1)*/ > + > /* KM_NUSA */ > #elif defined(CONFIG_KM_NUSA) > #define KM_IVM_BUS "pca9547:70:9" /* I2C2 (Mux-Port 1)*/ > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
