On Tue, 2013-09-24 at 13:46 +0530, Prabhakar Kushwaha wrote:
> To support 8 bit ECC for 8K page size NAND flash, number of ecc bytes
> required are more than 128.
>
> so increase eccpos array to support 256 entries.
>
> Signed-off-by: Prabhakar Kushwaha <prabha...@freescale.com>
> ---
>
> Based upon git://git.denx.de/u-boot.git branch master
>
> include/mtd/mtd-abi.h | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/include/mtd/mtd-abi.h b/include/mtd/mtd-abi.h
> index d51c1ab..83987dc 100644
> --- a/include/mtd/mtd-abi.h
> +++ b/include/mtd/mtd-abi.h
> @@ -162,7 +162,7 @@ struct nand_oobfree {
> */
> struct nand_ecclayout {
> uint32_t eccbytes;
> - uint32_t eccpos[128];
> + uint32_t eccpos[256];
> uint32_t oobavail;
> struct nand_oobfree oobfree[MTD_MAX_OOBFREE_ENTRIES];
> };
Could you bring over the Linux definition from 3.7.1 instead (in mtd.h
rather than mtd-abi.h)? For some reason that change didn't make it into
U-Boot when other stuff was synced.
-Scott
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
