This patch series is a combination of "sf: Add common probe support" "sf: Add support for extended/quad read and write commands" http://www.mail-archive.com/u-boot@lists.denx.de/msg121668.html http://u-boot.10912.n7.nabble.com/PATCH-v2-00-10-sf-Add-support-for-extended-quad-read-and-write-commands-td160964.html
This patch series adds common probe support for all flash vendors except ramtron. spi_flash_probe is a new addition where all flash driver probing is combined into a common file, this means spi_flash_probe.c adds a new probing style common to all flashes. Apart from common probing, this series also adds support for extended read commands and quad read/write commands. http://comments.gmane.org/gmane.comp.boot-loaders.u-boot/150148 http://permalink.gmane.org/gmane.comp.boot-loaders.u-boot/167026 There is a bit discussion going on for supporting this: http://u-boot.10912.n7.nabble.com/PATCH-00-12-cmd-sf-Add-support-for-read-and-write-instructions-td143749.html Concept: Initially I tried to add individual sf write/read commands to respective flash read/write commands, but later some discussion to mainline about this and changed the implementation. As Michal and me were trying to change this as like the "implementation will discover the fastest command by taking the supported commands from flash and a controller. Controller supported commands will always been a priority." Means I have added rd_cmd and wr_cmd params on spi_flash_id_params table. So the flash user may fill these with flash supported commands, and also spi controller use is also have rd_cmd and wr_cmd from spi.h, so the spi user will fill these with controller supported commands. and the resultent command is calculated based fastest commands by taking inputs from spi and flash, but spi(controller) has always a priority. Supported commands: - CMD_READ_ARRAY_SLOW - CMD_READ_ARRAY_FAST - CMD_READ_DUAL_OUTPUT_FAST - CMD_READ_DUAL_IO_FAST - CMD_READ_QUAD_OUTPUT_FAST - CMD_PAGE_PROGRAM - CMD_QUAD_PAGE_PROGRAM Testing repo branch: ------------------- $ git clone git://git.denx.de/u-boot-spi.git $ cd u-boot-spi $ git checkout -b master-next-test origin/master-next-test REQUEST FOR ALL SPI CODE CONTRIBUTORS/USERS, PLEASE TEST THESE CHANGES W.R.T YOUR HW IF POSSIBLE. Please let me know for any issues/concerns/questions. -- Thanks, Jagan. Jagannadha Sutradharudu Teki (36): sf: Divide spi_flash into multiple parts sf: probe: Add new spi_flash_probe support sf: probe: Add support for M25P* flash parts sf: probe: Add support for EN25Q* flash parts sf: probe: Add support for GD25* flash parts sf: probe: Add support for MX25L* flash parts sf: probe: Add support for W25* flash parts sf: probe: Add support for S25FL* flash parts sf: probe: Add support for SST25* flash parts sf: probe: Add support for AT45DB* flash parts sf: probe: Give proper spacing on flash table params sf: probe: Add support for SST_WP sf: probe: Add support to clear flash BP# bits sf: probe: Add support for erase sector selection flag sf: probe: Add support for flag status polling sf: probe: Move BAR config to spi_flash_validate_ids sf: Add proper comment style on spi_flash structure sf: ramtron: Add support for separate flash driver sf: Remove unneeded flash drivers files sf: probe: Add support for EN25Q64 sf: probe: Add support for S25FL256S_256K sf: probe: Add support for S25FL512S_256K sf: probe: Use print_size arg as page_size sf: probe: Print erase_size while printing flash details sf: probe: Simply the BAR configuration logic sf: ops: Add static qualifier to spi_flash_cmd_bankaddr_write sf: probe: Add support for MX25L25635F sf: probe: Add support for MX25L51235F sf: Remove spi_flash_do_alloc references doc: SPI: Add status.txt for tracking SPI subsys status sf: Add extended read commands support sf: Add quad read/write commands support sf: ops: Add configuration register writing support sf: Set quad enable bit support sf: spi_flash cleanups spi: spi cleanups doc/SPI/status.txt | 28 ++ drivers/mtd/spi/Makefile | 15 +- drivers/mtd/spi/atmel.c | 544 --------------------------------- drivers/mtd/spi/eon.c | 60 ---- drivers/mtd/spi/gigadevice.c | 65 ---- drivers/mtd/spi/macronix.c | 98 ------ drivers/mtd/spi/ramtron.c | 123 +++++++- drivers/mtd/spi/spansion.c | 141 --------- drivers/mtd/spi/spi_flash.c | 571 +---------------------------------- drivers/mtd/spi/spi_flash_internal.h | 151 ++++----- drivers/mtd/spi/spi_flash_ops.c | 451 +++++++++++++++++++++++++++ drivers/mtd/spi/spi_flash_probe.c | 400 ++++++++++++++++++++++++ drivers/mtd/spi/sst.c | 238 --------------- drivers/mtd/spi/stmicro.c | 202 ------------- drivers/mtd/spi/winbond.c | 141 --------- drivers/spi/spi.c | 3 + include/configs/top9000.h | 1 - include/spi.h | 99 +++--- include/spi_flash.h | 119 ++++---- 19 files changed, 1205 insertions(+), 2245 deletions(-) create mode 100644 doc/SPI/status.txt delete mode 100644 drivers/mtd/spi/atmel.c delete mode 100644 drivers/mtd/spi/eon.c delete mode 100644 drivers/mtd/spi/gigadevice.c delete mode 100644 drivers/mtd/spi/macronix.c delete mode 100644 drivers/mtd/spi/spansion.c create mode 100644 drivers/mtd/spi/spi_flash_ops.c create mode 100644 drivers/mtd/spi/spi_flash_probe.c delete mode 100644 drivers/mtd/spi/sst.c delete mode 100644 drivers/mtd/spi/stmicro.c delete mode 100644 drivers/mtd/spi/winbond.c -- 1.8.3 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
