On Tue, Sep 24, 2013 at 11:51 AM, Marek Vasut <ma...@denx.de> wrote: > Dear Otavio Salvador, > >> On Tue, Sep 24, 2013 at 11:40 AM, Marek Vasut <ma...@denx.de> wrote: >> > Now that mkimage can generate an BootStream for i.MX23 and i.MX28, >> > use the mkimage as a default tool to generate the BootStreams instead >> > of the elftosb tool. This cuts out another obscure dependency. >> > >> > Signed-off-by: Marek Vasut <ma...@denx.de> >> > Cc: Fabio Estevam <fabio.este...@freescale.com> >> > Cc: Otavio Salvador <ota...@ossystems.com.br> >> > Cc: Stefano Babic <sba...@denx.de> >> > --- >> > >> > arch/arm/cpu/arm926ejs/mxs/Makefile | 11 +++++---- >> > arch/arm/cpu/arm926ejs/mxs/mxsimage.mx23.cfg | 4 ++-- >> > arch/arm/cpu/arm926ejs/mxs/mxsimage.mx28.cfg | 4 ++-- >> > doc/README.mxs | 34 >> > +++++++++++++++++++++++++--- 4 files changed, 41 insertions(+), 12 >> > deletions(-) >> > >> > diff --git a/arch/arm/cpu/arm926ejs/mxs/Makefile >> > b/arch/arm/cpu/arm926ejs/mxs/Makefile index 3d66892..3e9cbdb 100644 >> > --- a/arch/arm/cpu/arm926ejs/mxs/Makefile >> > +++ b/arch/arm/cpu/arm926ejs/mxs/Makefile >> > @@ -25,14 +25,15 @@ $(LIB): $(OBJS) >> > >> > $(call cmd_link_o_target, $(OBJS)) >> > >> > # Specify the target for use in elftosb call >> > >> > -ELFTOSB_TARGET-$(CONFIG_MX23) = imx23 >> > -ELFTOSB_TARGET-$(CONFIG_MX28) = imx28 >> > +ELFTOSB_TARGET-$(CONFIG_MX23) = mx23 >> > +ELFTOSB_TARGET-$(CONFIG_MX28) = mx28 >> >> Uh?! this seems wrong. > > Why ?
elftosb uses the former way; in case you might change the target var for: MXSIMAGE_TARGET So this does not cause confusion. -- Otavio Salvador O.S. Systems http://www.ossystems.com.br http://code.ossystems.com.br Mobile: +55 (53) 9981-7854 Mobile: +1 (347) 903-9750 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
