Abandon this patch. Will upload new patch relate ECC on off config for C29XPCIE.
Best regards, Liu Po > -----Original Message----- > From: Liu Po-B43644 > Sent: Wednesday, August 21, 2013 2:28 PM > To: u-boot@lists.denx.de > Cc: sun york-R58495; Wood Scott-B07421; Liu Po-B43644 > Subject: [PATCH] powerpc/c29xpcie: DDR ECC off since hardware issue > > Some boards booting up fail since the DDR ECC chip has bad impedance in > current hardware, make the DDR ECC off when booting. > > Signed-off-by: Po Liu <po....@freescale.com> > --- > include/configs/C29XPCIE.h | 3 --- > 1 file changed, 3 deletions(-) > > diff --git a/include/configs/C29XPCIE.h b/include/configs/C29XPCIE.h > index cce2288..388fe2b 100644 > --- a/include/configs/C29XPCIE.h > +++ b/include/configs/C29XPCIE.h > @@ -109,10 +109,7 @@ > #define SPD_EEPROM_ADDRESS 0x50 > #define CONFIG_SYS_DDR_RAW_TIMING > > -/* DDR ECC Setup*/ > -#define CONFIG_DDR_ECC > #define CONFIG_MEM_INIT_VALUE 0xDeadBeef > -#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER > > #define CONFIG_SYS_SDRAM_SIZE 512 > #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 > -- > 1.8.0 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
