Dear Troy Kisky, > On 9/20/2013 3:45 AM, Marek Vasut wrote: > > Dear Troy Kisky, > > > >> i.mx6 has 1 otg controller, and 3 host ports. So, > >> CONFIG_USB_MAX_CONTROLLER_COUNT can be greater than 1 > >> even though only 1 device mode controller is supported. > >> > >> Signed-off-by: Troy Kisky <troy.ki...@boundarydevices.com> > > > > The problem is, will the 3 additional ports still work? I suspect they > > will, but then if you run 'usb reset', the gadget port will also be > > switched back into USB Host function, no > > > > Best regards, > > Marek Vasut > > The next patch checks the OTG id before switching to host mode. If it is > grounded, then it enters > host mode, otherwise it doesn't. But, running 'usb reset' on a > netconsole may kill your connection.
It won't if you properly ignore rhis one controller depending on the OTG pin then, no ? > I haven't tested that. Do you have a suggestion to fix that? I've been > testing with tftp transfers only. > > Thanks > Troy Best regards, Marek Vasut _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
