Hi Eric, On 18/09/2013 15:48, Eric Nelson wrote: > > This allows the boot script to produce the DTB name as shown > here: > > https://github.com/boundarydevices/u-boot-imx6/blob/staging/board/boundary/nitrogen6x/6x_bootscript.txt#L72 > > > If/when you move to a single binary for DQ/DL, you won't have > a separate choice as shown above. > > Let me know your thoughts on this.
It would be helpful if we agree on a set of common variables (across architectures) to be automatically set by u-boot at the startup. The proposed mechanism is already used in u-boot: see the "dieid#" variable for TI's OMAP. Regards, Stefano -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de ===================================================================== _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot