Hi Marek, Stefano Sorry, for the long delay between postings.
This series is based on u-boot-usb/master branch. After this series, nitrogen6x works with tftpboot to transfer files over usb, and will recognize a usb stick in the OTG port. This V4 has been rebased to the latest u-boot-usb/master branch and changed to address Marek comments. The most noticeable change is the addition of "add support for host mode otg port" Stefano, if you would you like to take the last 3 patches, there should not be a problem. The patches are mostly independent, so if a patch has an issue, please feel free to skip it. An exception is 1/17 should be before 2/17 if Stefano's branch merges upstream first, otherwise nitrogen6x will get a build error. Thanks Troy Kisky (17): usb: gadget: mv_udc: don't check CONFIG_USB_MAX_CONTROLLER_COUNT usb: ehci-mx6: add support for host mode otg port usb: gadget: ether set wMaxPacketSize usb: gadget: ether: return error from rx_submit if no request usb: gadget: mv_udc: split mv_udc.h file usb: udc: add udc.h include file usb: gadget: mv_udc: fix typo in error message usb: gadget: mv_udc: set is_dualspeed = 1 usb: gadget: mv_udc: fix full speed connections usb: gadget: mv_udc: optimize bounce usb: gadget: mv_udc: flush item before head usb: gadget: mv_udc: optimize ep_enable usb: gadget: mv_udc: zero transfer descriptor memory on probe usb: gadget: mv_udc: clear desc upon ep_disable mx6: iomux: add GPR1 defines for use with nitrogen6x nitrogen6x: add otg usb host/device mode support nitrogen6x: add CONFIG_MV_UDC arch/arm/include/asm/arch-mx6/iomux.h | 6 ++ board/boundary/nitrogen6x/nitrogen6x.c | 33 ++++++++ drivers/serial/usbtty.h | 3 +- drivers/usb/gadget/designware_udc.c | 1 + drivers/usb/gadget/ether.c | 4 + drivers/usb/gadget/mpc8xx_udc.c | 1 + drivers/usb/gadget/mv_udc.c | 113 ++++++++++++++++----------- drivers/usb/gadget/mv_udc.h | 115 ++++++++++++++++++++++++++++ drivers/usb/gadget/omap1510_udc.c | 1 + drivers/usb/gadget/pxa27x_udc.c | 1 + drivers/usb/host/ehci-hcd.c | 7 ++ drivers/usb/host/ehci-mx6.c | 135 +++++++++++++++++++++++---------- drivers/usb/musb/musb_udc.c | 3 +- include/configs/mx6qsabreauto.h | 2 +- include/configs/nitrogen6x.h | 8 +- include/usb/designware_udc.h | 31 -------- include/usb/mpc8xx_udc.h | 19 +---- include/usb/musb_udc.h | 40 ---------- include/usb/mv_udc.h | 118 ---------------------------- include/usb/omap1510_udc.h | 27 +------ include/usb/pxa27x_udc.h | 26 +------ include/usb/udc.h | 61 +++++++++++++++ 22 files changed, 409 insertions(+), 346 deletions(-) create mode 100644 drivers/usb/gadget/mv_udc.h delete mode 100644 include/usb/musb_udc.h create mode 100644 include/usb/udc.h -- 1.8.1.2 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
