From: Karlheinz Jerg <karlheinz.j...@keymile.com>
The board is similar to the standard km_kirkwood board. From a
u-boot point of view, the only difference is an increased
256 MiB DRAM (128M16). A board based on this design is for
example the SUP12.
Signed-off-by: Karlheinz Jerg <karlheinz.j...@keymile.com>
Signed-off-by: Holger Brunck <holger.bru...@keymile.com>
---
boards.cfg | 1 +
include/configs/km_kirkwood.h | 10 ++++++++++
2 files changed, 11 insertions(+)
diff --git a/boards.cfg b/boards.cfg
index dbd8479..f48c5bb 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -167,6 +167,7 @@ Active arm arm926ejs kirkwood iomega
-
Active arm arm926ejs kirkwood karo tk71
tk71 -
-
Active arm arm926ejs kirkwood keymile km_arm
km_kirkwood km_kirkwood:KM_KIRKWOOD
Valentin Longchamp <valentin.longch...@keymile.com>
Active arm arm926ejs kirkwood keymile km_arm
km_kirkwood_pci km_kirkwood:KM_KIRKWOOD_PCI
Valentin Longchamp <valentin.longch...@keymile.com>
+Active arm arm926ejs kirkwood keymile km_arm
km_kirkwood_128m16 km_kirkwood:KM_KIRKWOOD_128M16
Valentin Longchamp <valentin.longch...@keymile.com>
Active arm arm926ejs kirkwood keymile km_arm
kmcoge5un km_kirkwood:KM_COGE5UN
Valentin Longchamp <valentin.longch...@keymile.com>
Active arm arm926ejs kirkwood keymile km_arm
kmnusa km_kirkwood:KM_NUSA
Valentin Longchamp <valentin.longch...@keymile.com>
Active arm arm926ejs kirkwood keymile km_arm
kmsuv31 km_kirkwood:KM_SUV31
Valentin Longchamp <valentin.longch...@keymile.com>
diff --git a/include/configs/km_kirkwood.h b/include/configs/km_kirkwood.h
index 0e6073c..b8b64c4 100644
--- a/include/configs/km_kirkwood.h
+++ b/include/configs/km_kirkwood.h
@@ -35,6 +35,16 @@
#define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/
#define CONFIG_KM_FPGA_CONFIG
+/* KM_KIRKWOOD_128M16 */
+#elif defined(CONFIG_KM_KIRKWOOD_128M16)
+#define CONFIG_IDENT_STRING "\nKeymile Kirkwood 128M16"
+#define CONFIG_HOSTNAME km_kirkwood_128m16
+#undef CONFIG_SYS_KWD_CONFIG
+#define CONFIG_SYS_KWD_CONFIG \
+ $(SRCTREE)/$(CONFIG_BOARDDIR)/kwbimage_128M16_1.cfg
+#define CONFIG_KM_DISABLE_PCIE
+#define KM_IVM_BUS "pca9544a:70:9" /* I2C2 (Mux-Port 1)*/
+
/* KM_NUSA */
#elif defined(CONFIG_KM_NUSA)
#define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/
--
1.8.0.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
