From: David Brownell <dbrown...@users.sourceforge.net>
Don't needlessly include lowlevel init code; that's only really
needed with boot-from NOR (not boot-from-NAND). The 2nd stage
loader (UBL) handles that before it loads U-Boot.
Signed-off-by: David Brownell <dbrown...@users.sourceforge.net>
--- a/cpu/arm926ejs/davinci/lowlevel_init.S
+++ b/cpu/arm926ejs/davinci/lowlevel_init.S
@@ -45,6 +45,8 @@
#include <config.h>
+#ifndef CONFIG_SKIP_LOWLEVEL_INIT
+
.globl lowlevel_init
lowlevel_init:
@@ -705,3 +707,5 @@ DDR2_START_ADDR:
.word 0x80000000
DUMMY_VAL:
.word 0xa55aa55a
+
+#endif /* !CONFIG_SKIP_LOWLEVEL_INIT */
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
