hi Bhupesh, I want to incoporate this patch to the arm64 patch so that it is more complete. My I have your authorization? Best Regards, David
> -----原始邮件----- > 发件人: "Bhupesh Sharma" <bhupesh.sha...@freescale.com> > 发送时间: 2013年9月4日 星期三 > 收件人: u-boot@lists.denx.de > 抄送: tr...@ti.com, feng...@phytium.com.cn, "Bhupesh Sharma" > <bhupesh.sha...@freescale.com> > 主题: [PATCH] vexpress/v8: Add support for SMSC91C111 integrated MAC and PHY > module > > This patch enables ethernet support in ARMv8 foundation model. The ARMv8 > foundation model supports a SMSC91C111 integrated MAC and PHY module > which is present at base address 0x01A000000. > > The patch has been tested on ARMv8 foundation model by running ping/tftp > between the foundation model and the host PC via a bridged network. > > Signed-off-by: Bhupesh Sharma <bhupesh.sha...@freescale.com> > --- > This patch is based on the ARMv8 support related patches sent out > by David Feng. The V5 of this patchset from David can be found here: > http://u-boot.10912.n7.nabble.com/PATCH-v5-0-4-arm64-patch-td161939.html > > To test the ethernet functionality on a ARMv8 foundation model: > > - Launch the model with BRIDGED networking option: > --network=bridged > > - This will create an ethernet interface (eth0) inside the model and > an interface ARM0 on the Host PC. > > - Assign appropriate IP addresses: > ~ On Host: > $ ifconfig ARM0 10.10.10.11 > ~ On foundation model: > VExpress# setenv ipaddr 10.10.10.10 > VExpress# setenv gatewayip 10.10.10.11 > VExpress# setenv serverip 10.10.10.11 > > - Now try out ping/tftp tests. > > board/armltd/vexpress64/vexpress64.c | 14 ++++++++++++++ > include/configs/vexpress_aemv8a.h | 4 ++++ > 2 files changed, 18 insertions(+) > > diff --git a/board/armltd/vexpress64/vexpress64.c > b/board/armltd/vexpress64/vexpress64.c > index 4febece..3bebdbd 100644 > --- a/board/armltd/vexpress64/vexpress64.c > +++ b/board/armltd/vexpress64/vexpress64.c > @@ -77,3 +77,17 @@ void __gpio_request(unsigned gpio, const char *label) > } > void gpio_request(unsigned gpio, const char *label) > __attribute__((weak, alias("__gpio_request"))); > + > +/* > + * Board specific ethernet initialization routine. > + */ > +int board_eth_init(bd_t *bis) > +{ > + int rc = 0; > + > +#ifdef CONFIG_SMC91111 > + rc = smc91111_initialize(0, CONFIG_SMC91111_BASE); > +#endif > + > + return rc; > +} > diff --git a/include/configs/vexpress_aemv8a.h > b/include/configs/vexpress_aemv8a.h > index d207d00..8e309b3 100644 > --- a/include/configs/vexpress_aemv8a.h > +++ b/include/configs/vexpress_aemv8a.h > @@ -118,6 +118,10 @@ > /* Size of malloc() pool */ > #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128 * 1024) > > +/* SMSC91C111 Ethernet Configuration */ > +#define CONFIG_SMC91111 1 > +#define CONFIG_SMC91111_BASE (0x01A000000) > + > /* PL011 Serial Configuration */ > #define CONFIG_PL011_SERIAL > #define CONFIG_PL011_CLOCK 24000000 > -- > 1.7.10.4 > > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot