Hi On Wed, Sep 4, 2013 at 10:44 AM, Sricharan R <r.sricha...@ti.com> wrote: > On Wednesday 04 September 2013 01:01 PM, bin4ry wrote: >> Hi everybody, >> >> I need to add functionality to the SPL code. I tried to implement in a >> memory-saving way, however, the SPL is about 45 kB after compilation. To >> get compilation working, I had to set CONFIG_SPL_MAX_SIZE to (45 * >> 1024). Now, the SPL as well as u-boot won't boot. After the device' >> (PandaBoard ES - OMAP4460) reset, nothing happens regarding it's output >> on terminal. >> >> My question: is it theoretically possible to to establish a successfully >> booting SPL with ~45 kB in size for this device? The device' >> on-chip-memory is 56kB so it could fit in there. If so, what needs to be >> configured / tuned to get it working? Are there any other features I >> could omit from the binary to make it smaller? >> >> Thanks a lot, >> -b >> _______________________________________________ >> U-Boot mailing list >> U-Boot@lists.denx.de >> http://lists.denx.de/mailman/listinfo/u-boot >> > Do you have a Secure device or GP ? >
if it is Pandaboard? No he has not. I have increased up to 40Kb and it works with serial boot and sdcard/emmc boot. Michael > Regards, > Sricharan > _______________________________________________ > U-Boot mailing list > U-Boot@lists.denx.de > http://lists.denx.de/mailman/listinfo/u-boot _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
