Hi Michal, On Mon, 19 Aug 2013 09:36:33 +0200, Michal Simek <mon...@monstr.eu> wrote:
> Hi Albert, > > please pull these 3 zynq patches to your arm tree. > I have rebased the tree on the 2013.07 to remove that new nds32 patches. > > There is still pending the arm: lds: Remove libgcc eabi exception handling > tables > patch. Have you considered to also add it? > > v3: > - Rebase on the v2013.07 because Albert didn't want to nds32 stuff > > v2: > - Changed email address, > - There was incorrect rebase which I have fixed - correct sha1 now > > Thanks. > Michal > > > The following changes since commit 62c175fbb8a0f9a926c88294ea9f7e88eb898f6c: > > Prepare v2013.07 (2013-07-23 07:58:13 -0400) > > are available in the git repository at: > > git://www.denx.de/git/u-boot-microblaze.git zynq > > for you to fetch changes up to 037e0d25c6ee6367beca3062759993d10759dff2: > > zynq: Enable axi ethernet and emaclite driver initialization (2013-08-19 > 09:32:00 +0200) > > ---------------------------------------------------------------- > Michal Simek (3): > zynq: Add new ddrc driver for ECC support > zynq: slcr: Wait 100ms till clk is properly setup > zynq: Enable axi ethernet and emaclite driver initialization > > arch/arm/cpu/armv7/zynq/Makefile | 1 + > arch/arm/cpu/armv7/zynq/ddrc.c | 50 > ++++++++++++++++++++++++++++++ > arch/arm/cpu/armv7/zynq/slcr.c | 2 +- > arch/arm/include/asm/arch-zynq/hardware.h | 8 +++++ > arch/arm/include/asm/arch-zynq/sys_proto.h | 1 + > board/xilinx/zynq/board.c | 19 ++++++++++++ > 6 files changed, 80 insertions(+), 1 deletion(-) > create mode 100644 arch/arm/cpu/armv7/zynq/ddrc.c > > Applied to u-boot-arm/master, thanks! Amicalement, -- Albert. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
