On Fri, Aug 23, 2013 at 05:11:01PM -0400, Robert P. J. Day wrote: > On Fri, 23 Aug 2013, Luka Perkov wrote: > > > On Fri, Aug 23, 2013 at 08:25:07AM -0400, Robert P. J. Day wrote: > > > i'm sure there's a simple answer to this -- i built u-boot for my > > > beaglebone black using the "am335x_boneblack" config, which supports > > > saving env info to the eMMC HW partition boot1. but now that it's > > > there, is there a way i can manipulate that info with fw_printenv and > > > fw_setenv? > > > > I have put this in OpenWrt: > > > > https://dev.openwrt.org/browser/trunk/package/boot/uboot-envtools/patches/110-add-support-for-MTD_ABSENT.patch > > https://dev.openwrt.org/browser/trunk/package/boot/uboot-envtools/patches/115-writing-environment-for-mtd-devices.patch > > > > With those two you will be able to use fw_{printenv,setenv} on MMC > > devices. > > i'll get a chance to test the above this weekend, but i just want to > make absolutely sure we're talking about the same thing. are you > saying that with the above patches, the u-boot-tools will be able to > manipulate an eMMC HW partition just as easily as a regular MTD > partition?
Yes. > and, if so, what is the format of the entry one would add > to /etc/fw_env.config to refer to that eMMC HW partition (in this > case, boot1)? I have done this for imx6 wandboard in OpenWrt: https://dev.openwrt.org/browser/trunk/package/boot/uboot-envtools/files/imx6 So example config would look like: /dev/mmcblk0 0x60000 0x2000 0x2000 Luka _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot