Currently, there is only one EEPROM on c29xpcie board which isAT24C1024.
We program the SPD data at beginning of the AT24C1024.But the AT24C1024
has a 16-bit sub-address mode. This patch is tomake it work when getting
SPD in a 16-bit sub-address EEPROM.
Signed-off-by: Po Liu <po....@freescale.com>
---
board/freescale/c29xpcie/ddr.c | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/board/freescale/c29xpcie/ddr.c b/board/freescale/c29xpcie/ddr.c
index 3337d6c..28f1bd2 100644
--- a/board/freescale/c29xpcie/ddr.c
+++ b/board/freescale/c29xpcie/ddr.c
@@ -84,3 +84,15 @@ void fsl_ddr_board_options(memctl_options_t *popts,
popts->cs_local_opts[i].odt_wr_cfg = FSL_DDR_ODT_CS;
}
}
+
+void get_spd(generic_spd_eeprom_t *spd, u8 i2c_address)
+{
+ int ret = i2c_read(i2c_address, 0, 2, (uchar *)spd,
+ sizeof(generic_spd_eeprom_t));
+
+ if (ret) {
+ printf("DDR: failed to read SPD from address %u\n",
+ i2c_address);
+ memset(spd, 0, sizeof(generic_spd_eeprom_t));
+ }
+}
--
1.8.0
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
