From: David Feng <feng...@phytium.com.cn>
1. function board_init_f in board_f.c should firstly zero gd_t structure
before it call initcall_run_list, otherwise the debug print will go run
if DEBUG is defined. Because the printf function will use global data
to determine whether serial port is initialized and could be written.
2. function board_init_r in board_r.c should firstly relocate init_sequence_r
table before it call initcall_run_list. Command table also should be
relocated.
Signed-off-by: David Feng <feng...@phytium.com.cn>
---
common/board_f.c | 6 ++++++
common/board_r.c | 17 +++++++++++++++++
2 files changed, 23 insertions(+)
diff --git a/common/board_f.c b/common/board_f.c
index 5e738fb..f437bcb 100644
--- a/common/board_f.c
+++ b/common/board_f.c
@@ -1009,6 +1009,12 @@ void board_init_f(ulong boot_flags)
gd = &data;
#endif
+ /*
+ * Zero gd_t first, otherwise the debug print in initcall_run_list
+ * function before zero_global_data is called will go wrong.
+ */
+ memset((void *)gd, 0, sizeof(gd_t));
+
gd->flags = boot_flags;
if (initcall_run_list(init_sequence_f))
diff --git a/common/board_r.c b/common/board_r.c
index 86ca1cb..1b4bdd2 100644
--- a/common/board_r.c
+++ b/common/board_r.c
@@ -157,6 +157,13 @@ static int initr_reloc_global_data(void)
*/
gd->env_addr += gd->relocaddr - CONFIG_SYS_MONITOR_BASE;
#endif
+#ifdef CONFIG_NEEDS_MANUAL_RELOC
+ /*
+ * We have to relocate the command table manually
+ */
+ fixup_cmdtable(ll_entry_start(cmd_tbl_t, cmd),
+ ll_entry_count(cmd_tbl_t, cmd));
+#endif /* CONFIG_NEEDS_MANUAL_RELOC */
return 0;
}
@@ -899,6 +906,7 @@ init_fnc_t init_sequence_r[] = {
initr_modem,
#endif
run_main_loop,
+ NULL,
};
void board_init_r(gd_t *new_gd, ulong dest_addr)
@@ -906,6 +914,15 @@ void board_init_r(gd_t *new_gd, ulong dest_addr)
#ifndef CONFIG_X86
gd = new_gd;
#endif
+#ifdef CONFIG_NEEDS_MANUAL_RELOC
+ /*
+ * We have to relocate the init_sequence_r table manually
+ */
+ init_fnc_t *init_fnc_ptr;
+ for (init_fnc_ptr = init_sequence_r; *init_fnc_ptr; ++init_fnc_ptr)
+ *init_fnc_ptr = (init_fnc_t *)((unsigned long)(*init_fnc_ptr) +
gd->reloc_off);
+#endif /* CONFIG_NEEDS_MANUAL_RELOC */
+
if (initcall_run_list(init_sequence_r))
hang();
--
1.7.9.5
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
