Hi Steven,

On 8/20/2013 14:04, Steven Rosenberg wrote:
Hi Bo,

To keep it simple, we need a microcontroller driver that accesses a few 
peripherals on the board, not just Ethernet(GMAC), also UART, GPIO, I2C, etc. 
No human intervention. One boots on power up and the driver would need to load 
and run at boot time and access the hardware (hopefully by interfacing with 
existing dedicated drivers or by replacing them).

I think the peripherals you mentioned are working with the mainline u-boot. If the one you tested doesn't work, please just let us know that.

Hence the questions on creating a device driver under uboot. If you can point 
to specific documentation (possibly a miscellaneous driver category) we would 
greatly appreciate it. Creating a device tree file from scratch (because atmel 
did not provide one) seemed like a good deal of work without proper examples 
and we were looking for more tutorial.

Thank you for your help.

With Best Regards.

Steven.

Best Regards,
Bo Shen
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to