Hello Chunhe,
Am 16.08.2013 09:10, schrieb Chunhe Lan:
This workaround is for the erratum I2C A004447. Device reference
manual provides a scheme that allows the I2C master controller
to generate nine SCL pulses, which enable an I2C slave device
that held SDA low to release SDA. However, due to this erratum,
this scheme no longer works. In addition, when I2C is used as
a source of the PBL, the state machine is not able to recover.
At the same time, delete the reduplicative definition of SVR_VER
and SVR_REV. The SVR_REV is the low 8 bits rather than the low 16
bits of svr. And we use the CONFIG_SYS_FSL_A004447_SVR_REV macro
instead of hard-code value 0x10, 0x11 and 0x20.
The CONFIG_SYS_FSL_A004447_SVR_REV = 0x00 represents that one
version of platform has this I2C errata. So enable this errata
by IS_SVR_REV(svr, maj, min) function.
Signed-off-by: Zhao Chenhui<chenhui.z...@freescale.com>
Signed-off-by: Chunhe Lan<chunhe....@freescale.com>
Cc: Scott Wood<scottw...@freescale.com>
Cc: Heiko Schocher<h...@denx.de>
---
Changes for v2:
- Caller directly uses CONFIG_SYS_FSL_A004447_SVR_REV
to judge whether SVR_REV is less than or equal
CONFIG_SYS_FSL_A004447_SVR_REV
- SVR_REV is the low 8 bits rather than the low 16
bits of svr
Changes for v3:
- Rework codes for the newest mainline
arch/powerpc/cpu/mpc85xx/cmd_errata.c | 5 +++++
arch/powerpc/include/asm/config_mpc85xx.h | 16 ++++++++++++++++
arch/powerpc/include/asm/fsl_i2c.h | 1 +
arch/powerpc/include/asm/processor.h | 5 +----
drivers/i2c/fsl_i2c.c | 14 +++++++++++---
5 files changed, 34 insertions(+), 7 deletions(-)
Applied to u-boot-i2c.git, thanks.
bye,
Heiko
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot