This patch set replaces I2S1 channel with I2S0 channel.
Corresponding changes have been done in audio codec to
support I2S0 channel.
Changes in V2:
- Added cover letter.
- Configured GPIO chipselect to enable MAX98095 codec.
Dani Krishna Mohan (6):
Sound: WM8994: Support I2S0 channel
DTS: Addition of I2S0 channel and replacing I2S1
ARM: Change from I2S1 to I2S0 for audio on SMDK5250
Sound: I2S: Replacing I2S1 with I2S0 channel.
DTS: Addition of GPIO chipselect for MAX98095
Sound: MAX98095: Support I2S0 channel
arch/arm/cpu/armv7/exynos/clock.c | 13 ++--
arch/arm/cpu/armv7/exynos/pinmux.c | 15 ++++-
arch/arm/dts/exynos5250.dtsi | 10 ++-
arch/arm/include/asm/arch-exynos/clock.h | 8 ++-
arch/arm/include/asm/arch-exynos/cpu.h | 2 +
arch/arm/include/asm/arch-exynos/i2s-regs.h | 6 ++
arch/arm/include/asm/arch-exynos/periph.h | 1 +
board/samsung/dts/exynos5250-smdk5250.dts | 8 +--
board/samsung/dts/exynos5250-snow.dts | 9 +--
drivers/sound/max98095.c | 29 ++++----
drivers/sound/samsung-i2s.c | 16 +++--
drivers/sound/sound.c | 2 +-
drivers/sound/wm8994.c | 95 +++++++++++----------------
drivers/sound/wm8994_registers.h | 77 ++++++++++++----------
14 files changed, 149 insertions(+), 142 deletions(-)
--
1.7.9.5
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
