The target uses AUART 3 instead of the DUART for console output.
Signed-off-by: Andreas Wass <andreas.w...@dalelven.com>
Cc: Fabio Estevam <fabio.este...@freescale.com>
Cc: Marek Vasut <ma...@denx.de>
---
boards.cfg | 1 +
include/configs/mxs.h | 7 ++++++-
2 files changed, 7 insertions(+), 1 deletion(-)
diff --git a/boards.cfg b/boards.cfg
index 454da7f..79d6cd8 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -203,6 +203,7 @@ mx23evk arm arm926ejs
mx23evk freesca
m28evk arm arm926ejs m28evk denx
mxs m28evk
mx28evk arm arm926ejs mx28evk
freescale mxs mx28evk:ENV_IS_IN_MMC
mx28evk_nand arm arm926ejs mx28evk
freescale mxs mx28evk:ENV_IS_IN_NAND
+mx28evk_auart_console arm arm926ejs mx28evk
freescale mxs
mx28evk:MXS_AUART,MXS_AUART_BASE=MXS_UARTAPP3_BASE,ENV_IS_IN_MMC
sc_sps_1 arm arm926ejs sc_sps_1
schulercontrol mxs
nhk8815 arm arm926ejs nhk8815 st
nomadik
nhk8815_onenand arm arm926ejs nhk8815 st
nomadik nhk8815:BOOT_ONENAND
diff --git a/include/configs/mxs.h b/include/configs/mxs.h
index a684166..124dc1e 100644
--- a/include/configs/mxs.h
+++ b/include/configs/mxs.h
@@ -119,11 +119,16 @@
/* GPIO */
#define CONFIG_MXS_GPIO
-/* DUART Serial Driver */
+/*
+ * DUART Serial Driver.
+ * Conflicts with AUART driver which can be set by board.
+ */
+#ifndef CONFIG_MXS_AUART
#define CONFIG_PL011_SERIAL
#define CONFIG_PL011_CLOCK 24000000
#define CONFIG_PL01x_PORTS { (void *)MXS_UARTDBG_BASE }
#define CONFIG_CONS_INDEX 0
+#endif
/* Default baudrate can be overriden by board! */
#ifndef CONFIG_BAUDRATE
#define CONFIG_BAUDRATE 115200
--
1.8.1.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
